2005 pac brake install Question

[tjm]

Hi folks

I have this question out to pac brake. But if someone has experience i would appreciate some hints here.

this screen shot is step 10 of the installation instructions for my 2005. You can see the steering column protector. It appears this connector is somewhere near the fuel filter. Its hard to tell because the image quality of the pic is so low. I cant seem to find an unused connector on my truck. Any ideas?

 

[AH64ID]

There is a 3 pin connector coming off the ECM in that area, that’s what you need.

It’s there, unless you have an 06 instead of an 05.

My PacBrake didn’t use that connection, maybe it’s because you have an auto.

 

[tjm]

There is a 3 pin connector coming off the ECM in that area, that’s what you need.

It’s there, unless you have an 06 instead of an 05.

My PacBrake didn’t use that connection, maybe it’s because you have an auto.

This connector is a 3 pin connector with 2 wires running into the main wiring harness bundle next to the ecm. That it you think?

 

[AH64ID]

That’s it.

I see a MM3 in your sig, so that’s likely what is plugged into it.

 

[tjm]

I do have a MM3. Thanks John.