Here I am

304 Stainless intake plenum ??

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Cummins CEO

Console Cover

I have been working with a buddy that is a sanitation welder (so his welds are probably the nicest that I have ever seen), and he was looking at the plenum that I had here and figures that he could build one with a polished look out of 304 stainless. My original set-up that need the base and heater grid removal hasn't that practical for the majority of people. We would be able to build them for the 94-98,98. 5-02,03-07(5. 9 only). I'm just seeing if there is any interest.
 
Last edited by a moderator:
My guy just brought a proto-type by and it looked great, he is gonna get me pic by thursday, of the horn with a view of the welds of from the insides because I told him that you guys would probably be interested in that as well. It's going to be a real first class looking piece. Finally someone that is delivering me what they promised. :) I will keep everyone updated.
 
I have been working with a buddy that is a sanitation welder (so his welds are probably the nicest that I have ever seen), and he was looking at the plenum that I had here and figures that he could build one with a polished look out of 304 stainless for around $200 with a plate drilled and tapped for the extra goodies we all seem to have. My original set-up that need the base and heater grid removal hasn't that practical for the majority of people. We would be able to build them for the 94-98,98. 5-02,03-07(5. 9 only). I'm just seeing if there is any interest.



definitely be interested. I have a composite one now and am unhappy with it
 
Sounds good, I just talked with him and hopefully I can post the pics tomorrow. He said that they will be between $225-$250 depending on the quantity. He said that I need to buy at least 20 and if I get 40 the price would be better, so I figure that I can get them for $225 if I get 40. I compiling a list of those interested and you will get a message as soon as there ready so that you get first crack at them.
 
Matt,



Love the composite look. It is styled like the 24 valve intakes (mine is a 12 valve) It was supposed to fit mine and it does ----except it rubs on the master cylinder. Don't know if they sent me the wrong one or not. I bought it over the internet and can't get a response from outfit that sold it. I think it will rub a hole all the way through soon.
 
Back
Top