Here I am

315/70/17 ?

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

projector beams

Carpet replacement

Status
Not open for further replies.
Any one know if this tire/wheel combo (315/70/17) will work on a stock height '01 4x4? Truck has camper and snow plow springs, sits pretty high. Also is there any difference in wheel fit, offset between 2nd and 3rd gen trucks. These wheels were on a 3rd gen, fit my 2nd gen? Thanks guys
 
i've run a set of 3rd gen alloys with 315's on my '01 for two years ...



they rub the control arms at full lock ...



stone stock suspension ... has 140k on the original front end and is fine
 
I put the D25 skyjacker 2 1/2" replacement coils in the front.

I had the snowplow prep (46/39 coils) and never thought 35's would fit with out a lift.

I think you may hear some rubbing. I have no rubbbing at all.
 
Thanks for the responses! And the pics of your rig, MackTruck. I am going to make the drive to check out the above tire/wheel combo and try it on my truck. Jim G
 
Status
Not open for further replies.
Back
Top