315's and H2 Wheels

[JEly]

I found this website for any one interested... ... ... ... . I have heard a lot of guys doing this... ... ... . so just thought I would pass this onwww.vfrtruckaccessories.com



I hope this link works... ... ... ... ... I have not had luck doing it yet

 

[stownsend]

Nope, the link does'nt work. Try again.

 

[Forrest Nearing]

bad link, but the address is good... looks like a great deal on those wheels/tires!

 

[flimmy]

Anybody have a pic of a 3rd gen truck with the H2 rims on it ?

 

[HEMI®Dart]

It works now.



http://www.vfrtruckaccessories.com/



Their Prices seem CHEAP!



Am I reading them right? $150 for 4 H2 take-offs. Even the tires are not badly priced.

 

[Cooker]

The H2 wheels have really come down in price in the last few months. You can buy them for under $200 a set on eBay all the time.



FTR - To fit on a 2nd gen Dodge the wheels will need to be machined. They are not a direct bolt up. I do have a pic somehere of H2 wheels on a Dodge. I will see if I can dig it up.

 

[JEly]

Thanks for fixing the link... ... ... ... ... . I am not for sure what I am doing wrong but I have tried several times with no luck!!



I read a post on a different site where someone had done the H2 wheels for the Dodge but he had to do some machining first to the center hole and I think the offset is different but he got them to work

 

[flimmy]

If it's just a little machine work thats no problem, I have a friend that works at a machine shop that could do it for me. I may use some xmas $$ and buy some tires

 

[CumminFast]

Did you ever find a pic of those rims? I wouldn't mind buying a set... you really cant beat less than $40 a rim. And $300 for a set of BFGs??? Man I bet those things cost over $700 new.

 

[krs]

The shipping charged is over $200. 00 pretty much anywhere you live; if you click the buy with paypal link they tell you how much for each state. So for me in WA it's $225. for the wheels and $440 for the tires - $675. total. They're in Michigan.

 

[bighammer]

They won't fit without some mods. Center bore on ours are 4. 75" and the H2 is 4. 5" .

 

[krs]

"Center bore on ours are 4. 75" and the H2 is 4. 5"



Hmmm, could be an important 1/4". Most alloy wheels have a builtup lip around the center that's probably put there for strength.

 

[JEly]

Their is a pic of a truck with the wheels on it at www.dieseltruckresource.com under the performance and accessoriess section. (sorry for not attaching link)

He was saying under the thread that you actually need to open the center hole 0. 50" and he did this with a cnc machine but it can also be done with a grinder if your careful.

He has a couple different pics attached to the thread

 

[flimmy]

Here is the link to the post.



http://www.dieseltruckresource.com/dev/showthread.php?threadid=36278

 

[flimmy]

$370 for 4 tires and $185 for 4 rims to my door It's so tempting to get the tires. My 03 only has 3200 miles on the Michelin's and from what I've read on here they should last to about 50k. Anybody want to buy 4 good Michelin's for $370

 

[CSilkowski]

Does anyone know if the H2 wheels are cast, forged, or machined and how many lbs they can handle??

 

[bighammer]

I just visited the Hummer website and it says they are cast.

 

[Cooker]

I don't know how much I would trust a cast wheel especially after I machine some of the center away.

 

[CumminFast]

What is alloy? Thats pretty heavy isnt it? I guess its not aluminum.

 

[MWBrooks]

Alloy is a blend of different metals.





Mike