Here I am

4 Inches all the way!

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

K&N Filter

Air ride seats

Status
Not open for further replies.
I finally got enough time to install ted Janetty's 4" system from the headpipe to the muffler (muffler on was already 4" scavanged from my earlier truck). But after talking to Ted awhile back, I decided to install the US gear "super-duty" (no not the F-guys) Decellerator. This is a 4" diameter unit with waste-gate bypass. Very hefty casting. What I did was use the front hanger on the headpipe still at stock location, run an extension pipe to behind the transfer case crossmember and bolt the Decellerator up directly before the muffler. So the stock resonator is gone, and it's a half Janetty/half-Banks system. Sound is just a little louder than before, but not noticable in the cab at all.

Here's what IS noticable.

1) Markedly quicker spool-up on turbo and hence, response to throttle. Expected that.

2) Enough increase in power to make me feel that I am not having to use as much pedal to achive the same speed. Pleasant surprise.

3) Engine starts quicker and just feels like it is "freer", like it breathes better. Makes me wonder why D/C doesn't do this from the factory.

4) The BIG surprise; resonance in the cab at about 45 mph is GONE! Much more pleasant on the road. I attribute this to the different characteristics of the 4" pipe, and the damping effect of that heavy casting on the Decellerator. Steve McDaniel noted this elsewhere on the forum. That stock headpipe acts like a pipe hit with a hammer. It needs damping.

BTW, I haven't hooked up the lecetrics on the Decellerator yet. Maybe next weekend. Hoping it will do better than some of the reports I've seen on the smaller unit. Ted, feel free to wade in here- has anyone else put this rig together?

John H.

------------------
'99 White Sport 4x4 QC SB, 5spd. w/GV od, 4. 10 locker, American Racing SilverAtlas mags & stainless hubs w/Dunlop 285/75R16's, CMI 3000 cap, Mopar fender flares, Linex, Luverne stainless boards, Q-logic bass, Painless Wiring, BriteBox, K&N and Ted J. 's 4" exhaust w/US Gear 4" Super-Duty Decellerator.
 
Hey John, sounds like a great system. How much was the Superduty Decelerator exhaust brake? Thanks.

Michael

------------------
'00 Ram, RegCab, 4x2, Cummins, 6-spd, Driftwood/Agate, CD, CB, Reunel rear bumper, Line-X ...
 
Thank You John; 4" pipe does everthing I say it will, and your living proof!
Joe Donnelly Says he tested it on the dyno and it doesn't provide any benifit, I think not!
I don't beleive that he drove the truck before and after to see the benifits.
I don't mean any disrespect to Joe and his research, I just don't feel he gave it a fair shot.
Micheal; I am a dealer for US gear and can give you a price on the 4" decelerator if you call me.
They are very easy to install and wire, If you have any questions feel free to call me for help.

Ted Jannetty

------------------
Ted Jannetty, Owner President Jannetty Racing Enterprises Inc.
97 3500 4x4 club cab 5spd. JRE stage 3 power kit, JRE 4" exhaust
JRE 1/2 inch fuel system, Cummins 300 hp injectors, Prime loc,
Cummins chrome kit, US Gear 20% over drive, 3. 54 axle, 2 gauge
mount with 50 lb. boost gauge, BD exhaust brake.
 
I don't mean any disrespect to Joe D. either. I am certain that the many other enhancements mentioned here (BOMB away, guys!) will provide more measurable increases on a dyno. What I found is that the improvements noted above are of real value while driving. That's also important (and worth the investment) in my book.

Michael, I did some swapping with another dealer to get the Decellerator. Check Ted for the price, I believe you'll still be in the ballpark of the smaller turbo-mounted units.

JJH

------------------
'99 White Sport 4x4 QC SB, 5spd. w/GV od, 4. 10 locker, American Racing SilverAtlas mags & stainless hubs w/Dunlop 285/75R16's, CMI 3000 cap, Mopar fender flares, Linex, Luverne stainless boards, Q-logic bass, Painless Wiring, BriteBox, K&N and Ted J. 's 4" exhaust w/US Gear 4" Super-Duty Decellerator.
 
Status
Not open for further replies.
Back
Top