5" Muffler

[Smokin Joes 2500]

OK, Im looking for a good sounding (aggressive) 5" muffler. I threw my Magnaflow in the trash cause it necked down to 4" inside. I now have a Dynomax bullet muffler... It sounds allright but under hard throttle it cackels a bit I dont like that. I want a good deep rumble but with good flow... In other words I want my cake & to eat it too :-laf

 

[Cory]

"Silent Might"

I know the guy who makes the rokktech crank sensor also sells a "Silent Might" muffler and also has the recorded sounds of the muffler on his website. I cant remember the site off the top of my head, but if you search for the silent might muffler Im sure you'll find it. I will try looking for it and post the website.

 

[Smokin Joes 2500]

Thanks Bud

 

[Cory]

Heres what one guy has to say about it.

http://www.tdr1.com/forums/showthread.php?t=156345&highlight=Silent+Might+Muffler

 

[Cory]

Heres the website

Heres the website.

http://www.rokktech.com/_mgxroot/page_10437.html

 

[03 H.O. Police]

Nelson makes a 5" usually can pick one up at southplains cummins

 

[Smokin Joes 2500]

Thanks guys.

 

[sled4fun]

I just put a Donaldson #M100580 (5" in/out x 51" long) on my 05 3500 without a kitty. It sounds great to me. Nice and quiet under load and I know it flows more than anything else you can buy. It is a straight through design with a perforated baffle on the inlet side. I left the baffle in as it was flow rated very high already and I wanted quiet! I also installed a 13" x 5" tip at the same time, but don't think it did too much for the sound. I used adapters to connect it up to my 4" head and tail pipes. Very quiet and freeflowing system.

 

[Smokin Joes 2500]

just ordered MBRP 5" from Clyde at West Coast Diesel Performance. clyde took good care of me, he was very friendly. new muff will be here in 10-15 days as it is being produced right now. hope i like the sound at a $160