2nd Gen Non-Engine/Transmission 60" Line Of Fire Led

[PaulG]

has anyone have these get in the way for the spare tire crank down hole? not sure how wide these are and if it can't make it past that hole.

 

[PaulG]

someone has to have this

 

[pgleavitt]

When I got my line of fire I noticed the same thing. The way it mounts ,you can remove it with a philips head screw driver to gain access to the spare tie crank hole. Do a search as this has been gone over before. Sorry I can't remember the outcome. I ended up with a aftermarket rear bumper and had more room.

 

[diesel4power]

Yes it covers the hole for the tire crank. I saw the line of fire on one website where it had a different part number for our application. Basicaly it came with some snaps and other stuff so you could remove it easily. What I did was use several 3" pieces of Dual Lock by 3M (its a bit like velcro but used in more semi permanent applications) Now if I need to get to the crank hole I will just pull off the line of fire and then return when finished. You could probably use peel and stick velcro but Dual Lock is some series good stuff.



Paul

 

[Yo Hoot]

I mounted mine to the underside of the tailgate itself.