A few questions

[LDechaine]

Hey there! First of all, everyone on here is DEFINITELY a wealth of knowledge and I'm loving the W250 so far! I have a few questions, and I have done searches on the forum which has returned some good information, but still not exactly the answers I'm looking for.



I am looking to install the 16cm turbo housing, the 3200rpm kit, and new injectors ASAP and I am trying to find the best source(s) for each. Any help with this would be great. The local Cummins shop here in Phoenix looked at me like a dear caught in the headlights when I asked about a 16cm turbo housing, so I thought perhaps they weren't be best source for info. Thanks in advance!



-Loren & Stacks (truck)

 

[cerberusiam]

Here ya go http://www.piersdiesel.com/



They will have everything you need and all the advice to point you in the right direction.

 

[LDechaine]

Hey cerberusiam...



I checked out thier site as I had done once before, and this time I did find the injectors and the 16cm housing and I plan to order both. But, it looks like the RPM governor spring kits that they have are only for the 2nd Gen 12valve motors? Am I missing what I need for mine or is it somewhere else? Thanks!

 

[cerberusiam]

When you order the parts ask them about the 3200+ governor spring for the VE punp. I think they have it but it isn't listed. You can have any Bosch authorized dealer oreder one for you also. I have the part number if needed but check with Piers as they may have them in stock.

 

[LDechaine]

Thanks for the help! I've found the Bosch Part # as being 1-464-650-366, I hope that is correct. I'm getting there, little by little... I think I can, I think I can. haha

 

[BushWakr - RIP]

LD'... . when you call dont' hesitate to ask any questions you need answers too... . it's how we ALL got started in this sport/hobby bud... .



pb... .