Engine/Transmission (1994 - 1998) Aftermarket sources for speedo gears?

[Fordiesel69]

All dealers are on national back order and have been for serval months. Any aftermarket sources I can get one with 31 or 32 teeth?

 

[Fordiesel69]

Anyone at all?

 

[Fordiesel69]

Im sure someone has gone thru this at some point. Just for clarification, I need the small nylon gear that goes on the end of the speed sensor. It inserts into the t-case and I currently have a 29 tooth gear because the PO had huge 33's on it. Now that I have the factory size back on, the speedo is off.

 

[tony597fitter]

Here you go.

Speedometer Gear, Speedometer Gears, Ford, GM, Dodge 700R4

 

[Fordiesel69]

thanks. Now for the most important question, do I need a 31 tooth or 32 tooth. I have a 3. 5 axle ratio as indicated on the hood sticker and I have the factory tires back on that are 245-75-16's. Chrysler says 32 but an old email on the net indicated a 31. Which is right?

 

[tony597fitter]

I have a 31 from my stock tires.



I now have 285/75/16 (33x12) and need the 29 tooth.

Wanna trade?

I'll PM you also.

Tony

 

[Fordiesel69]

tony, check your email.