In trying to find which wire I should choose to install a switch, I need some help. My ignition module connector has five wires connected to it.
White #1
White/orange stripe # 2
Gray/red stripe # 3
Black/white stripe # 4
Pink/gray stripe`# 5
They are laid out right to left with the release tab on top. It is an 8-pin connector with only five used.
Input appreciated.
White #1
White/orange stripe # 2
Gray/red stripe # 3
Black/white stripe # 4
Pink/gray stripe`# 5
They are laid out right to left with the release tab on top. It is an 8-pin connector with only five used.
Input appreciated.
Last edited: