Guns, Bows, Shooting Sports, and Hunting Any AR15 freaks lurking on here?

[Deleted member 995608]

Just bought my first stripped AR lower. It's gotta be Ca friendly which shouldn't be hard to do. Just have to play by the rules... .

 

[HDR]

You have to use the "button Bullet" and no more than a ten round magazine.

 

[Bob4x4]

Cali sucks when it comes to the gun laws :{

 

[AMink]

California thinks Barney Fife had too many bullets. Honestly, I try to avoid going there. I feel bad for the real Americans who are there and can't get out right now.

 

[p-Bar]

If it wasn't for the weather and my business I would be out of here

 

[jclark5810]

I'm outta here in 3 months (hopefully). My AR's have been chastised for too long. I have to have a button my mini 30 too because of the "assault" stock i have on it You should have seen the looks on these two lib snowshoer people last weekend as i was hiking out of the national forest with my AR. I smiled and waved and asked them how their day was, following with 'my what a gorgeous day it was'. Their jaws were dropped to the ground the whole time, i just smiled and trudged out on to the trail and back to the truck. These people out here have been brain washed by the puglosi's, frankenfeinstein's, brady's and so forth. Anyway that's for another time... and forum:-laf



JHawes, What type of receiver did you get? full bushmaster, and a spikes lower and the upper from my colt. I had to "lose" the lower because of its name, but i can own the spikes and bushmaster because their names aren't on the list. Liberalism really is a mental disorder. My father in law is building a . 458 Socom so that should be fun to shoot... as long as i'm not paying for ammo, sheesh.



They're a lot of fun, one can get really carried away though too. I keep mine simple though. No optics (they trained us to shoot open sights so that feels more comfortable), just a laser. You can find pinned mags but i figure why even bring that kind of attention. When people see you with one, the first thing they think is "machine gun with a banana clip", cops are enroute. Sad.

 

[BIGNASTY]

Only place that one would have to LURK is CA

 

[jray]

I've built a few from stripped lowers. Many that I have built have been for friends and family. Based on my own experience in using several different lower parts kits over the years, may I recommend RRA lower parts kit. I've tried DPMS, CMMG and RRA lower parts kits and the Rock River seems to be the best IMHO. Believe me none have been perfect, however RRA seems to be the most consistent in quality.

 

[snuff]

You have to use the "button Bullet" and no more than a ten round magazine.

button bullet?

 

[snuff]

sent it too early,



running a spikes lower with a model 1 sales A3 flat top upper carbine, rails, nm sights, fore end stick. got two more lowers to build out, one will run as an SPR kit, already got a scope for it. the other not sure. have fun... ...

 

[Mikey-KE7LBB]

I am quite fond of the Bushmaster M-4. I just wish that I went with the flat top receiver instead of the fixed carry handle.



The best mod so far has been the . 50 Beowulf upper



Shoulder hurts a bit and bruising is visible after 2 mags, but I enjoy every bit of it!! :-laf

 

[Deleted member 995608]

I'm outta here in 3 months (hopefully). My AR's have been chastised for too long. I have to have a button my mini 30 too because of the "assault" stock i have on it You should have seen the looks on these two lib snowshoer people last weekend as i was hiking out of the national forest with my AR. I smiled and waved and asked them how their day was, following with 'my what a gorgeous day it was'. Their jaws were dropped to the ground the whole time, i just smiled and trudged out on to the trail and back to the truck. These people out here have been brain washed by the puglosi's, frankenfeinstein's, brady's and so forth. Anyway that's for another time... and forum:-laf



JHawes, What type of receiver did you get? full bushmaster, and a spikes lower and the upper from my colt. I had to "lose" the lower because of its name, but i can own the spikes and bushmaster because their names aren't on the list. Liberalism really is a mental disorder. My father in law is building a . 458 Socom so that should be fun to shoot... as long as i'm not paying for ammo, sheesh.



They're a lot of fun, one can get really carried away though too. I keep mine simple though. No optics (they trained us to shoot open sights so that feels more comfortable), just a laser. You can find pinned mags but i figure why even bring that kind of attention. When people see you with one, the first thing they think is "machine gun with a banana clip", cops are enroute. Sad.

JD Machine (formerly known as Kaiser Defense). I bought it because it's made in Ca and from what I know, they make the Spikes version.



Not sure what I want to buy yet. Rock River Arms two stage trigger for sure. Other than that, I haven't a clue. So amny goodies out there!

 

[BIGNASTY]

JD Machine (formerly known as Kaiser Defense). I bought it because it's made in Ca and from what I know, they make the Spikes version.



Not sure what I want to buy yet. Rock River Arms two stage trigger for sure. Other than that, I haven't a clue. So amny goodies out there!

JH they are in San Diego I think. My Son Made one from them and likes a bunch.

 

[AMink]

I don't have an AR (yet!) but would like to start from this piece. I've seen them in person and they are really nice. Cost more than others, but they are beautiful!

U. S. Firearms Academy Stripped Billet Lower Receiver Model BB-16

 

[Deleted member 995608]

I don't have an AR (yet!) but would like to start from this piece. I've seen them in person and they are really nice. Cost more than others, but they are beautiful!

U. S. Firearms Academy Stripped Billet Lower Receiver Model BB-16

That's the most important part of an AR lower, . . . . It's looks or engraved symbol. Whatever blows your dress up.



There are only like four companies in the US that mfg/mill these lowers for many different companies. Some have more/less milling marks than others etc etc.

 

[AMink]

That's the most important part of an AR lower, . . . . It's looks or engraved symbol. Whatever blows your dress up.



There are only like four companies in the US that mfg/mill these lowers for many different companies. Some have more/less milling marks than others etc etc.

The overall quality of the piece is what I was referring to. I've seen them up close and you can tell they're well made.

 

[Deleted member 995608]

The overall quality of the piece is what I was referring to. I've seen them up close and you can tell they're well made.

I hear on that.

 

[The patriot]

Un apologetic AR freak here.

I also sell AR parts. Everything except the lowers.

I'm in NJ which actually has worse gun laws than Cali, but I digress. #@$%!

 

[Deleted member 995608]

I bought a Geissele SSA trigger today, factory direct.



Was wanting RRA but they're backordered untill hell freezes over.



Didn't want to spend that much for a Geissele but at least I'm getting quality parts.

 

[The patriot]

I bought a Geissele SSA trigger today, factory direct.



Was wanting RRA but they're backordered untill hell freezes over.



Didn't want to spend that much for a Geissele but at least I'm getting quality parts.

Theyre the BEST AR trigger out there.

Too bad, I sell Geissele. I could probably have saved you some money.