Anyone Up for Either Last minute wrenching or post dyno Munchies?

[Wheaties]

For sure!! It never hurts to have the right tools anyhow, can't count on the BigDaddy's of the world to always be available, especially when it's something you can do yourself...

 

[ToolManTimTaylor]

we don't need no stinkin'.....

Injector pullers Naaaah just a 1/4 20 (I think) screw and just pull straight up ..... At least mine were that easy as I rememnber Right Scott??

 

[CTRam]

I think its metric Toolman, I believe it is the same size as the bolts for the intake plenum which is removed to give you room with the fuel lines.

 

[HoleshotHolset]

Sundaaaaay!!.....Sundaaaaay!!......Sundaaaaay!!

Couldn't we use the oil well drilling rig?

Come on!!! Pleeeaase??!!



Matt - see you tomorrow AM!

 

[Wheaties]

Wellll... ... ... ... ... ..... okay! As long as we can use my sawzall for the cleanup!! Just feed me enough beer so I can't see what I'm doing.

 

[HoleshotHolset]

I'll bring my 'bottle-rockets'..... *HUGE evil grin*



I ain't talkin' `bout fire-crackers either... . :-laf



Matt

 

[TORQUE THIS]

Dosen't BUDWEISER make an injector extractor





Wait a minute... It's the injector inserter

 

[HoleshotHolset]

I'm assuming we're still having this little shin-dig (sp?)... . see ya'all there in about an hour (I'm in Hartford, CT... )



Matt

 

[TORQUE THIS]

Doors are open, coffee is on, and BEER is COLD!!!!

 

[therabbittree]

cool its 840 we are pulling out now. . heheh i did a little pump tweaking hehehe i now have SMOKE and 25lbs of boost and it pulls nicer now heheh. . i brought some tool to tune more. . maybe i'll have 100hp on the dyno?... im bring photos and tapes . . see ya in 1 1/2hrs. . later

Deo

\x/ hillfolk!

 

[Snow man]

I've been busy at work,didnt see this post until 10 am Sunday, I'll be there next time,hopefully with some goodies to install. (ive got a bunch of stuff on the way).

 

[ToolManTimTaylor]

Ugh ... ... . Too ..... Mu... ch boose ... ... ... ... Must ... ... Drive to TqT's now ... ... ... ... Need to ... ... ..... co ..... c... .come to ... ... . *Sigh*



Wait theres beer there gotta go! see ya

 

[HoleshotHolset]

Cool get-together guys/gals... .

Yet another fun day... .



I need a NV-5600 with an exhaust brake... . WAY TOO COOL!! (Thanks Tim!)



The 'bottle-rocket' was a hit... as usual..... two Corona's in about 6 seconds total..... Happy Cinco de Mayo!!



See ya'all on the 11th... .



Matt - http://www.FreakinHockeyTape.com

 

[Mactruck]

Hey Guys,

Sorry I missed it. I'm at work right now (Sunday )



We'll definetely see you next weekend.

IE: The COMP IS ON!!! Oo.



Hope to push about 350 horses but I don't have a lock up switch so we'll see

 

[HoleshotHolset]

"I want a toilet seat made of solid gold... . but it's just not in the cards, baby!"

 

[TORQUE THIS]

*Beeeellllllch!!*

Ahh still wrenchin'

 

[TORQUE THIS]

*Beeeellllllch!!*

Ahh still wrenchin'

 

[TORQUE THIS]

Thanks guys for the help with the boost increase. That Edge EZ is awesome. Now it's time to save money for the transmission upgrade.





Good to see everyone again. Can't wait till next weekend





Look for the next wrench session in July.







P. S. Matt (HoleshotHolset )



You have to explain www.umassdrunks.com

 

[Wheaties]

Hey Mark! Thanks for the last minute burgers! I think I was ready to fall down. Sorry I missed Matt the younger. How about bumper stickers that say, 'Got Boost?'



The truck was a rocket on the way home, thanks again to all Joe's help! Man, route 34 is a bummer when there's ten cars ahead of you creeping over the terrain. But once we got to the highway, well, shall we say, I'm going to have to re-calibrate? Pedal time that normally would take me to 80, takes me past 90... ... Oo. Oo.



Hey, almost forgot, did anyone get Tim's name and address? We should put him on the mailing list!



Matt the elder

 

[ToolManTimTaylor]

Allready on it