autometer gauge ?s

[NLeach]

I got the ultra lite 2 series and I am already familiar with the autometers(had them in my Ford). I did not an autometer fuel press gauge though,and that is my question. Where do I hook it up to and what pressures and I looking to be at?Bone stock 06 1400 miles. How about boost,egt, and transmission temps,what seeme to be the norm?Oh one more,how do I get the headlight control panel off,just pull(havent tried yet) or does the dash need to be removed. Thanks in avance.

 

[R_Painter]

Im not sure about 06's but my 04 I had to install a banjo bolt into the cp3 at idle you will see about 8 psi and about 5psi at wot with my chips installed I could very easily pull pressure down to 0 Boost should be upper 20's maybe 28 psi,my egt's are about 750-800 at highway speeds empty,I have a built trans and I am running about 140 in town I am not sure about stock trans temp

 

[Mark Craig]

NLeach,



Get a banjo bolt and a flex hose as the electrical gauge senders tend to be fragile if bolted directly on the trucks engine, this gives it a vibration relief. Most vendors like us stock them and it's an easy install etc.



Mark @ DPPI