Here I am

B1/B2 Twin Turbo kit

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

-AN fitting questions

Pusher Pump Installed

Who offers a piping kit for this setup? Will use my current Kwikspool B1.



I know of Opoole and Mark Kendrick. Anyone else? If anyone has a vendor that offers this kit a picture of the finised overall look would be great.



And while we are at it, anyone running this setup want to comment? Likes? Dislikes? ... ..... Haven't seen a thread recently.
 
Last edited:
About time you stepped up to Twins, you should like that combo..... expect just a tad more lag and I know that is not an issue in your truck!



Jim
 
Still looking for options, haven't decided on which route I am going. Still waiting for reply from Opoole (email and PM). Kendrick replied right away(email)..... for what its worth.



Fred thanks for the email, working on replying.
 
I nowfrom what i had talked to people in Munchie last year that the B1/2 setup is the dream setup for street / strip / everyday. From what I can figure its a marriage made in heaven but I could be wrong. Snowman is a good man to talk to on the 1/2 punch
 
My B1/B2 twins are still chillin in on my dining room floor. Waiting on that tax return to pay for the head work needed to run these things.
 
I am at a loss here.

How does a TDR owner who owes another TDR owner as much money as he does,has yet to make any restitution on the money,have the ability to purchase a twins setup?. Seems to me like amounts owed should be taken care of first,then purchase your twins... ... ... ... ... . Andy
 
How about the comparisons of KS versus B1-2 for top turbo and b2 versus Big Brother for bottom turbo? I'm real happy with my B1-2 (HX40 exhaust outlet) for spool and performance, do I need to change the exh housing? I've also been told that using the HX35 as top turbo is as good or better, better spool, WAY cheaper out of the gate, and wastegating it to 30 +/- boost stays well within its map... :confused:

CRAP, now I've confused myself again! :{
 
Hammer said:
I am at a loss here.

How does a TDR owner who owes another TDR owner as much money as he does,has yet to make any restitution on the money,have the ability to purchase a twins setup?. Seems to me like amounts owed should be taken care of first,then purchase your twins... ... ... ... ... . Andy









:confused:
 
Dl5treez said:
Just wondering if you got your twins or decided to go another route?



Can you run them with the AirBulldog intake system?





Another route. Was planning on not using the intake system.



With fuel costs going the way they are considering selling the truck.
 
Last edited:
TDR member Meacham Evins (MEvins) has this setup on his '01 and its uhhh... . SCARY being that's its an auto with 600+ RHWP! :eek: :--) :-laf



I will call him tomorrow and tell him to check this thread out, and add his two cents.
 
How many of you are running the B1 turbos with the EX4 (HX-40) outlets? I am making a few kits ahead of time. Just looking to see thanks
 
Hey OPoole, would you suggest the B1-2 or KS exhaust config for the top turbo? With an external wastegate and 35-40psi, I'd think the KS would be well within its range and spool better. I remember when I bought my B1-2 I was told it could be changed easily, I just don't remember if the easy change was to a full B1 or to a KS
 
KS would be great as top turbo. I have used B1-2 turbo as top turbo also. Do you have

the EX4 outlet? This is a B1-2 non-wastegated on top with TiAL wastegate.
 
Back
Top