Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
TDR Magazine subscribers receive more than the magazine! You also gain additional forum privileges!
Details here: TDR Privileges
Subscribe to TDR Magazine here: https://www.tdr-online.com/
Attention: TDR Forum Junkies To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.
Yes. the increased volume of the turbos will need more exhaust flow than a 12cm housing will handle. the WG will shunt it around the little turbo into the inlet of the primary.
My turbo just died on the way back to college. I was woundering if i could run a B1 on a stock truck? If not what should i put back on because i like to bark my turbo and i want to throw some power at it. Let me know guy's.
You could install a KSB-1B. This is the fastest spooling Version for your truck. Then as Mark K replied a PE EZ, PE Comp or Equal would be a nice addition.
And as DHayden replied - the B-1 Bomber Turbos are the only Turbos that I would intentionally "Bark" without worry.
I have a few customers with the Standard size B-1 on 1st Gen Trucks with only mild fueling mods and they are Very happy. Their HP range as low as 250 and UP. The KSB-1B is two levels "Kwiker" spooling.
Call me if you have any questions. Thanks Kurt Yardley
i noticed a few of you guys have the camshafts, how was the improvement after doing the upgrade?? i am thinking about doing that, or possibly going to a B1