Just got done putting in a new lift pump along with the Wildcat max Flow fuel line kit. Everything installed okay, but when I bumped the starter to prime the system, I would only get 1. 5-2 psi post filter. I bumped the starter about 4-5 times, but the results didn't change. I checked the filter and it had filled back up, and there was fuel at the vp44. Swapped the old (weak but not dead) lift pump back in and it primed up and fired up.
So, my question; how many folks have had bad lift pumps right out of the box from Cummins?
BTW, the Max Flow kit was good for 2-3 psi at WOT even with the old lift pump. Good stuff!
So, my question; how many folks have had bad lift pumps right out of the box from Cummins?
BTW, the Max Flow kit was good for 2-3 psi at WOT even with the old lift pump. Good stuff!