Engine/Transmission (1994 - 1998) Barring Tool

[biggy238]

Has anyone gotten one of these from Napa? I saw a report of one from OTC in a search I just did. . Anyone else find one? I hate to have to order one from elsewhere when they might be able to get it.



Just in case though, through up manufacturers and P/N's please





Thanks

 

[Glen Pratt]

You can get one at any Cummins dealer.

 

[biggy238]

Yeah... but that means I have to drive the 60 mile round trip to the dealer that says "We don't really ever deal with 5. 9's. . we're a BIG TRUCK dealership". . you get the picture... they won't be getting my money.

 

[Glen Pratt]

You can also order one form Snap-On: http://buy1.snapon.com/catalog/tools.asp?tool=all&Group_ID=1294&store=snapon-store
Hands On tools.com has the OTC piece: http://www.handsontools.com/store/show_product/?product_id=204076
If you have an auto parts store that deals in KD tools the KD Part # for the barring socket is # 3824.

 

[BigPapa]

The Snap-On Part number is YA9565A. Took my Snap-On guy a week to find it. He priced it to me around $50.



Scott

 

[WDixon27]

my snap on douche is still working on getting me my timing set i ordered, this week makes two months. popped the otc barring tool on e-bay and have had it a week or two

The Snap-On Part number is YA9565A. Took my Snap-On guy a week to find it. He priced it to me around $50.



Scott

 

[bgilbert]

Alternator nut works good for me, and I save $50 each time ...

 

[Joe G.]

Alternator nut works good for me, and I save $50 each time ...

That only works one way and with the fan belt on.

 

[biggy238]

Joe Exactly. .



Pratt THANK YOU. . napa's service tools are all KD and we looked yesterday and couldn't find it.



Thanks everyone else too.

 

[biggy238]

I'm getting the SPX/OTC (miller) piece from napa... They also have the Timing kit and injector remove tools. . amongst other things for the cummins. . I'll be getting a timing kit when my tax return comes in.

 

[DieselTweaker]

my snap on douche is still working on getting me my timing set i ordered, this week makes two months. popped the otc barring tool on e-bay and have had it a week or two

My snap-on dealer keep's one on the truck im sure he would be more than happy to part with it.

 

[cyborg]

tooldiscounter.com



| OTC7471A | Barring tool, Cummins engine | $43. 76| $43. 76

 

[WDixon27]

fart knocker didn't come today and didn't come last tuesday ether, must be tired of me @itching at him or is going for the crappyest tool guy in town

My snap-on dealer keep's one on the truck im sure he would be more than happy to part with it.

 

[biggy238]

$58 to me... . local guys mark up slightly... I'm fine with that... i'll have it a LONG time.



OTC timing kit... which I though was congruent with miller... They priced at $389?!?! WTF?!?! I've seen them countless numbers of times for $215 or so...

I checked the catalogue number and sure enough... they priced the right part number. . Sounds like someone at OTC thought it was the MASTER kit... or they are seriously full of it one. . I couldn't believe that. .



3-5 working days to get my barring tool. . Either way my radiator is coming out to be fixed, the KDP tabbed and valves adjusted before christmas. . Should be fun.



Thank you guys.

 

[HeavyHauler]

Snap-on has theirs for $52. 95 right now with free shipping. It's gone up in the last few months - used to be $49. 95.

 

[KEdenfield]

I just got my bar tool from Cummin's they had it in stock and for 36 FRNs it was mine (I35 in FTW).



Is anybody selling a kit for the 12V engines that has all the special tools required, specifficlay timing setup?



I am putting my truck down to verify the KDP is done (seller said it was done, I'm leary) and fix the leaky cover, retro fit the fuel filter assy, change fuel lines, heater hose, fuel strainer/pump hose, valve adjustment, and pump the timing up to 17°.



I don't bendover for anybody, not even SnapOn.

 

[dtygart]

Got mine at Cummins (140 mi r/t) for about $25. Remember the 5. 9 is in a lot of medium duty trucks too. Barring tool fits B-series (ours) and C-series older big trucks.

david

 

[biggy238]

Is anybody selling a kit for the 12V engines that has all the special tools required, specifficlay timing setup?

ALL of the companies in this post sell a timing kit. . It generally has the barring tool in it, it has the socket, dial and other specialty tools needed to reset the timing. Only thing I didn't see in the SPX/OTC kit was the gear puller to remove the gear from the pump. And it was outrageously high

 

[1dslram]

As far as I am concerned the barring tool is a waste of money, I use a crank bolt for one way and a wrench on the fan clutch nut for the other direction. This is a lot faster than the barring tool and a lot easier to use. The complete kit is available from Snap On, it may be costly but works great.

Bruce

 

[linwil84]

Needed A Barring Tool To Pull My Trans On Saturday! Saw The Mac Tool Guy Parked Down The Street At The Cigar Shop And He Had The Tool On His Truck. $54. 00 Including Tax. Was Abile To Get The Job Done This Weekend!