Here I am

Blind Spot Alert

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Max care

2013 3500 4x4 6.7 SRW What Ball Joints?

Status
Not open for further replies.
Getting this error message on my 2020 Ram 3500. I've cleaning all the sensors that I can find. Wondering if anyone else has had this issue and were you able to fix it. TIA.

IMG_2114(1).JPG


IMG_2114(1).JPG
 
Go to the dealer, the computer will tell what's wrong.
You did what is possible for you as an owner.

Blindspot sensor (radar) is inside the taillight assembly(s).
 
Exactly! Is it supposed to be in both tail lights? If it was missing shouldn't there be a wire hanging where it plugs in?
The wiring is the bottom row of wires opposite the red plug release part. There is only 1 connector. But the ones that do not have it say No Connect.

It looks like it has the wiring.

Did it just stop working? How did it work prior to this message coming up, did you turn the function ON in the radio?

Maybe someone borrowed them?

I checked the 2019 and 2021 to see if randomly changed and it looks like the same system across those years.

Is it on your build sheet?
 
Maybe the whole lights as the once with the sensors are about 4x as expensive.
These lights never had sensors in them, the cut out is still there, that's the non blind spot version.
 
The wiring is the bottom row of wires opposite the red plug release part. There is only 1 connector. But the ones that do not have it say No Connect.

It looks like it has the wiring.

Did it just stop working? How did it work prior to this message coming up, did you turn the function ON in the radio?

Maybe someone borrowed them?

I checked the 2019 and 2021 to see if randomly changed and it looks like the same system across those years.

Is it on your build sheet?
Yes, blind spot is on the build sheet. I bought it used at a dealership in Texas. When I picked up the truck (2/2/23) we were in the middle of an ice storm. Salesman told me the error message was due to ice and snow being on the sensors. Looks like I get duped.
 
Yes, blind spot is on the build sheet. I bought it used at a dealership in Texas. When I picked up the truck (2/2/23) we were in the middle of an ice storm. Salesman told me the error message was due to ice and snow being on the sensors. Looks like I get duped.

Yes, looks like someone else has your sensors.
 
What a story.... :eek::D

Try to get'em on Ebay as take off. Like said a very expensive item otherwise.
Friend said they want almost a 1000$ each for them.
He smashed his light and wanted to buy a new one but refrained after he heard the dealers price and instead bought one that hasn't the feature and transferred the old sensor into it.
 
Does CarFax say it was wrecked or flooded? Take your vin to a local RAM service department and see if they will pull up the service history for you. You might find answers.
When a dealer checks in a used vehicle they would fix any issues or one would assume. After our test drive we noticed the tail light was cracked. Salesman took it back to fix while we were in Finance. They would take my check so couldn't take delivery of the truck at that time. We came back 3 days later, paid for the truck and when I was ready to drive off the salesman opened the passenger doors and said "don't worry about the error message, it's because the sensors are muddy" we were in tail end of the ice storm in Dallas Tx. 2/3/23. It was cold and miserable and I just wanted to get out of there. So I believed him. MY MISTAKE! Obviously, they replaced the broken taillight with a non-sensor light.
 
Status
Not open for further replies.
Back
Top