boost gauge hook up

[jughead]

dumb ? where do u hook up the boost gauge . do u cut the hose that hooks to the wastegate put a tee in there.

 

[firemanmarc]

If it as a 12v, there is a 1/4 or 1/8th plug in the intake manifold area that you take out and put fitting there. Good luck, marc

 

[McLaughlin]

If you have a 12v the easiest way is to replace one of the bolts in the intake manifold with a special bolt which is hollow down the center (banjo bolt?). The boost fitting then attaches to the new bolt. 24V versions are available at Piers (Piers has pictures of one in place) or Genos. I used one on my 12V that looked like the Piers bolt.