Broken Bosch VE KSB Housing

[darrollr]

I broke the KSB Housing for the cold start timing advance device. I have been resealing the Bosch VE pump on my brothers 93 12V. When I installed the electrical solenoid KSB, the housing cracked open. Does anyone know where I can find a replacement? I have scoured the inter web and can not find them anywhere. I can’t even find them on any parts lists? The number on the housing is 1 465 132 585. I’m hoping one of y’all gurus can help me out here. Thanks in advance for any help you can give!

 

[Ozymandias]

You dont have a VE Pump*, you have a P7100 Pump.
Might that help to search for the part, and should be available from a Bosch Dealer.

Verteiler Einspritz Pumpe = Rotary Injection Pump

 

[ofelas]

That picture is most definitely of a KSB housing from a VE injection pump.

The P7100 was installed on Dodge trucks starting 1994.

darrollr - I'll see if I have a KSB housing in the first gen parts bin this weekend.

You dont have a VE Pump*, you have a P7100 Pump.
Might that help to search for the part, and should be available from a Bosch Dealer.

Verteiler Einspritz Pumpe = Rotary Injection Pump

 

[Ozymandias]

That picture is most definitely of a KSB housing from a VE injection pump.

The P7100 was installed on Dodge trucks starting 1994.

darrollr - I'll see if I have a KSB housing in the first gen parts bin this weekend.

Gosh, I did not know that they had VE Pumps previously to the P Pumps.

Maybe I just shouldn't post anymore here.
I find every trap door.

 

[darrollr]

Yes, I definatly have a VE Pump. Thank you Ofelas! I would greatly appreciate that!

 

[GrantP]

Gosh, I did not know that they had VE Pumps previously to the P Pumps.

Maybe I just shouldn't post anymore here.
I find every trap door.

That's alright, while many would've known it's a VE pump I'd bet very few knew it stood for Verteiler Einspritz

 

[PBJ2500CTD]

Gosh, I did not know that they had VE Pumps previously to the P Pumps.

Maybe I just shouldn't post anymore here.
I find every trap door.

Ozy,
Don't feel bad or stop. We all find a trap door at one time or other. That helps us all learn something every day.

 

[darrollr]

That picture is most definitely of a KSB housing from a VE injection pump.

The P7100 was installed on Dodge trucks starting 1994.

darrollr - I'll see if I have a KSB housing in the first gen parts bin this weekend.

Ofelas,
Any luck finding a KSB Housing?

 

[ofelas]

Not yet, just a couple spare injection pumps. I do remember a boxful of takeoff parts form various injection pumps laying around though.

I can barely pronounce Verteiler Einspritz; I try to learn a new word every month or so, but the wife tells me I forget most of what she says

 

[Signal73]

As an option, Can they be deleted if no spare parts are available? My 4BT runs a VE pump and does not have one.

 

[NIsaacs]

As an option, Can they be deleted if no spare parts are available? My 4BT runs a VE pump and does not have one.

Yes, it is more for emissions than anything. The engine in my Ford (CPL 856) has it, a friend of mine has a CPL 600, it don't.

 

[NIsaacs]

Ozy,
Don't feel bad or stop. We all find a trap door at one time or other. That helps us all learn something every day.

Yup, just when I think I have it all figured out, someone comes up with a weird one. The military is great for their own spec's, check out this '02 12 valve, with a VP44 pump, I think it is military.
https://mopar1973man.com/topic/15597-02my-12-valve/?do=getNewComment

 

[ofelas]

darrollr - I could not locate the box of assorted VE parts; a Bosch dealer would be your best bet.