Can I really fit 35?

[KKunz]

Can I really fit 35" tires on stock wheel on my 04 with Carli leveling kit without having any rubbing or having to trim any thing?

 

[JKreiss]

Mine fit but would rub on tight turns or under any type of flex. I'm on logging roads a lot on weekends so i had to go down to 33"s for ample clearence. It didn't bother me much because i was coming down from a 6" so my 35"s were almost worn anyway. For you though i'd really look into it before you buy $1200 in tires and find out they rub. Some will say they fit fine and have no problems. I'm just stating my situation. Hope that helps.

 

[gsbrockman]

They will fit but they generally will also rub slightly at lock-to-lock turns..... even without a leveling kit.



#ad




#ad




#ad

 

[pigpenmorton]

I have 315/70/17 almost a 35 fit well rub a little on lock to lock a 2 " level kit helped a little

 

[RED]

Works fine for me. I have a different brand leveling kit, and 3" I think.

 

[VLopresti]

I have 35" Pro Comps and they do rub the control arms at lock-to-lock... . even with the KORE leveling kit...

 

[Udaloy]

Had 35's on my '02 with completely stock suspension. They rubbed at full lock. I'm not stupid, so I just backed off the steering a little. It's not like these turn on a dime anyhow, so I didn't care. If you want to have no rub at full lock and full suspension compression, you'll need a lift of at least 2''. The question for me is: is it worth the cost of a 2'' lift just for 35'' tires? IMHO, you might as well spend a little more for a 4'' and 36'' or possibly 37'' tires. My . 02 anyhow.

 

[SRadke]

On stock wheels they'll rub the control arms slightly but will not touch the body or bumper.

-Scott

 

[SWithrow]

I have 315's with a 2 inch leveling kit. I had the 315's on my stock rims and did not rub but the center of the tire seemed to be wearing more than the outer edges of the tires. I purchased a set of rims (9 inch steels) that sit out 1 inch further than stock and the tires rub a little on lock to lock.

 

[bzingre]

315/70 BFG AT with American Racing Pythons

Mine only rubbed the fender liner in reverse full lock. Not a big deal at all! The key was offset on the wheels.

 

[04blackcherry]

Yes. I have 315 BFG's on 17" steel on my '04 2500 long bed. Put simple 2" leveling spacers in the front. I made custom 1" blocks for the rear to help it look better. I needed new ubolts to put in the extra rear blocks. I have noticed no rub at all.

 

[hearingyourlies]

I have a lift and 35's still rub slightly lock-to-lock.

 

[Big_Horn]

have the starter kit from carli running 35" toyo mt's without rubbing what so ever...