Code P0088 hesitation during acceleration
My MIL light came on yesterday and I have 2 codes in memory: P2269 and P0088. the first code is old the 0088 is new. 0088 says (Fuel rail pressure is high). Truck ran fine for about 70 miles and after 4 restarts the mil light extinguished. Then 10 miles later I started getting a severe hesitation around 1100 rpm then after about 2 seconds it takes off and runs fine. It does this on every shift. Now I have a very loud idle almost sounds like a 12v idling, but anything above 1400 rpm sound normal. I also noticed fuel leak/seepage on top of the common rail I never noticed before. Injector or not?
My MIL light came on yesterday and I have 2 codes in memory: P2269 and P0088. the first code is old the 0088 is new. 0088 says (Fuel rail pressure is high). Truck ran fine for about 70 miles and after 4 restarts the mil light extinguished. Then 10 miles later I started getting a severe hesitation around 1100 rpm then after about 2 seconds it takes off and runs fine. It does this on every shift. Now I have a very loud idle almost sounds like a 12v idling, but anything above 1400 rpm sound normal. I also noticed fuel leak/seepage on top of the common rail I never noticed before. Injector or not?
Last edited: