Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
TDR Magazine subscribers receive more than the magazine! You also gain additional forum privileges!
Details here: TDR Privileges
Subscribe to TDR Magazine here: https://www.tdr-online.com/
Attention: TDR Forum Junkies To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.
You will get a 55 to signal the start of a self test and dump and a 55 to signal end of the test/dump. Anything in between is a error code, if all you have is 55's there are no codes.
Is there any way to clear the codes? I got a 15 and 24. One is no VSS signal; other is a TPS voltage high or low. (it was set to . 65volts at idle; key on, engine off). The no VSS signal is a duh!!- speedo isnt working.
Is there any way to clear the codes? I got a 15 and 24. One is no VSS signal; other is a TPS voltage high or low. (it was set to . 65volts at idle; key on, engine off). The no VSS signal is a duh!!- speedo isnt working.
Yes the way to reset the error codes is disconnect the battery, then you will have a new code #12 which is battery has been disconnected then your standard #55 all clear.