Condenser guard mounting

[PTsideshow]

Well along with the bumper cold start plug in, badge and the quick release grille kit. I installed the condenser guard
#ad

I got a couple more wire ties so I could make sure the screen stays in place and that the guard stays on the condenser. I put the screen up and over the top of the guard put one tie on each side of the top and bottom. as the UV resistance of the tie varies a lot.
#ad

Because the 2016 is slightly different than the instructions there is nothing to hold the L shaped lip on the top of the condenser I used one tie on each side top and bottom to keep the bottom from bouncing around, and tight to the condenser
#ad

#ad

It looks like it will do the job and make it easier to clean or chance the screen.

 

[SMcGrady]

Nice write up! Thanks

 

[h1seoul]

Thanks for the writeup

 

[kcpolk]

Is this something you made up yourself or a kit you purchased somewhere? If you bought it.... where and how much please?

 

[PTsideshow]

Geno's garage were else https://www.turbodieselregister.com...rewriting-Geno-s-garage?p=2477604#post2477604 has the link to it