Here I am

Cruise buttons flickering

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

EVIC has gone blank/black

Steps for a big guy

Status
Not open for further replies.
Recently, I noticed the backlighting on my cruise control buttons flickering off occasionally. It doesn’t appear dependent on turning the wheel to a certain position... MAYBE certain bumps in the road, but I’m not 100% certain. With this, at times, I am unable to turn the cruise control on. I’m guessing a bad connection somewhere. I did have the steering wheel wiring recall done some years back. Wondering if that could potentially be the cause.
Any direction or guidance would be appreciated.
Craig
 
Recently, I noticed the backlighting on my cruise control buttons flickering off occasionally. It doesn’t appear dependent on turning the wheel to a certain position... MAYBE certain bumps in the road, but I’m not 100% certain. With this, at times, I am unable to turn the cruise control on. I’m guessing a bad connection somewhere. I did have the steering wheel wiring recall done some years back. Wondering if that could potentially be the cause.
Any direction or guidance would be appreciated.
Craig

I had the same occurrence in my 2015 2500 and replaced the switch and everything works as it should. If it’s any indication of how troublesome they are, the dealer had it in stock! My experience with Chrysler products tells me if the part is in stock, they have a fair amount of trouble with that particular part.
 
Update: headed to work this morning & multiple attempts to turn on the cruise were unsuccessful, even when the backlighting wasn’t flickering. The opposite side buttons for scrolling through the EVIC worked with no problems.
 
Status
Not open for further replies.
Back
Top