Here I am

Cruse Control

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

engine reving up about 100 rpm on its own at idle

fuel filter relocation kit?

Status
Not open for further replies.
My cruse controll will turn on but not set. Is there any ideas?





















98 12v 2500 4x4 5sp ex cab, Green and Silver, banks straights, and w\o silencer ring
 
I have a 97. I had to clean the contacts on the switch. Mine won't turn on or off all the time but set always works. (Usually high humididy it gets worse.



I too the switch module off and cleaned it with a pencil eraser and it helped for about a year.





hope thats it, simpler the better.



james
 
Check under the left battery for a vacuum leak in the vacuum tube. Mind had hole melted in it from the battery heater lead.
 
Make sure the cable isn't broken or disconnected. Both at the throttle linkage and the control valve itself (under the left battery tray).
 
Status
Not open for further replies.
Back
Top