Here I am

CT Coffee Nites '06 Check in on what's happenin'

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Possible Northeast TDR dyno day, lets set it up.

OK tim were sorry

just wanted to make sure I was reading that right, about the truck, heck I dont blame ya! :cool:



PS ya really need to add this to yer sig :-laf
 
Things I've learned here lately...

I've been changing lots of stuff on the red wagon lately. Here's some things I've learned...



1. 913 pumps are pretty awesome.



2. So are SPS 62's



3. Aftermarket exhaust manifold bolt holes don't always line up exactly right.



4. It's a good idea to make sure the exhaust manifold gaskets are still in place before you tighten all the bolts down.



5. Barring the engine from underneath the truck is a big PITA.



6. Crazy-looking delivery valves can give you idle/lope issues.



7. Even if you have the best IC boots they tend to blow off if not installed properly.



8. There's a good reason why the TSB about pump shaft nut torque spec was written.



9. There's a good reason why the pump shaft and gear should be immaculate before the gear is torqued back on the shaft.



10. There's a good reason why you shouldn't re-use your pump shaft locknut too many times.



11. I hate it when I leave the oil dipstick in the wrong place and install the intake horn.



12. DDP4's are sweet injectors.



13. If you drive with a light right foot as a rule and you build an engine for performance, it's a good idea to get your buddies with heavy right feet to take your truck for a ride to see if it'll break on them. :-laf



14. When you get your friends to push your truck to the side of the road, it's not very nice to leave the e-brake on.



15. Removed to protect the guilty



16. It's good to have a buddy at the shop that lives near you that's willing to give you a ride home when you break your truck.



17. Pump shaft nut lockwashers are not 3/4".



18. It's good to have buddies at the shop that'll help you unf^ck your truck when you f^ck it up.



Anyone else at the coffee nites shop learn anything lately?
 
Last edited:
I like # 13 :-laf



#4 should be repeated somewhere down the list ;)



so should #11 :-laf



skinny tires leave skinnier burnouts ;)



3 red tie downs dont equal 1 big one



woodruff keys, are rough



walk into a store with a bolt or washer and suddenly you must have lupus :rolleyes:



shock bolts are NOT interchangeable with track bar bolts :p



dial indicators can only travel so much





PS HEY PAUL CLEAR YOUR PM INBOX THANKS!
 
Talking about white men's body parts is NOT cool...

Talking about black men's body parts is cool... (no not you Todd)

When there is a tornando warning, leave the wife and kids at home where the real danger is...

It is possible to eat Taco Bell for lunch and dinner...

Towing at 20mph is too fast...

What happens when 2 Irish men and 2 Polocks hang out... (read the above) 13, 14, 15...

Taco Bell dosen't sell Dr. Pepper or SHUT THE F&^K UP JUICE...
 
Back
Top