cummins parts manual on cd

[GTX]

Put me on the list also.

 

[LEEH]

I would like a copy also. Please let me know how much and if you need a disk or two. Thank you for your offer - (I'll bet you didn't expect the response you got though ! ! )



LEE H

 

[Patriot Diesel]

I'll take one as well. Just let me know what you need.



Thanks !!

 

[dremelts]

Please add me to the list also - let me know the cost.

 

[TxDieselKid]

correct me if I'm wrong, and I'll want one....!!!

This is the 5. 9B(1994?-98), not the ISB(1998. 5-02) right? If this is NOT the case then me on the list as well.



Andrew

 

[83 crew cab]

txdieselkid the way i understand it it is all of the 6bt family George

 

[Rammin On]

This is NOT a parts catalog!!!! The CD covers a multitude of engine families ... including the 6B ISB 6C ISC and others.



Has service bulletins and lots lots more. However without the Ser# and password ... navigating the CD is cumbersome and time consuming ... . you really need the above to make it work ... but there is a wealth of info there!



Keith

 

[Archive]

Parts CD........

The parts CD is "CEPC". It covers all midrange engines.



The engine listings are for: 3A, 4A, 6A, 6B, ISB6, 4B, B3. 3, 6C, and ISC.



It is a "Master Parts Book" on CD. Mine is a revision level 20 and has since been superceded a couple of times. CEPC is fun to play with, but it won't give you magical powers over your ECM. (Like ESDN will. )



BTW, it shows that "stick" injectors flow more fuel than the "automatics" do. You already know THAT kind of stuff.

 

[shendren]

Yes, i would like a copy. thanks. scott.



scott hendren

2526 central ave

columbus, indiana 47201

812-376-9590

 

[f.boyle]

WOW

your gonna' need a lot of copy stations!!! this must be getting up towards "LONGEST THREAD EVER" status!!! ?

 

[TxDieselKid]

so what exactly does it do.....build a fort out of lincon logs???

Just asking more questions before I invest in this. What really does it show? How to change injectors? The wonders of what the ECM can do? I am confused on what this cd does?



"Without the ser# and passcode... "??? So all I am get is a cumbersome version of this?



AAAHHHHH!!! I am courious, please help?



Andrew



P. S. Topfuel, Evan Beck says that the ESDN can't really be used on the DODGE ECM, I have read posts from you before but please e-mail me with more. This pice of software has always sparked intrest in me... . andrewinblinn@yahoo.com

 

[83 crew cab]

I will let you know more tx I have not got it yeat it is suposed to come with the pass word if you look back some pages you can see my link to the action George

 

[Animal]

I'm in, let me know how much.



Thanks

 

[JHansen]

Me too me too me too!

Lemme know when the time comes, where to send the money, and how much to send... . I'm so there!



Jason

Licensed Partsman Extraordinaire!

 

[stevek]

Me too... let me know where and who to make the check out to.

 

[shendren]

are you writing this down?... ... .....

 

[RBrunson]

CD

Add me to the list.

 

[homeka45]

Mahalo for the generous offer. let me know what you need to help offset your time and materials.

Thanks, Dan Wela.

 

[Archive]

There are different levels of password with ESDN. (As with INSITE. ) The part number on my CEPC is 3672067. I'm outta here ... no more E-Mails please. Thanks guys!!!

 

[wcaldwell]

I would like one, also.





Wayne