Engine/Transmission (1998.5 - 2002) Diesel Dynamics Dodge Cummins Hidden Spray Bar "Race" Nitrous Kit

[KSmid]

Anyone used this set up? Opinion and results? Is a 2 stage better , 1 intercooler-1 intake plenium? TS kit compared to it? Could a person design there own spray bar and not have to spend 1k on kit. I can get some used NOS stuff cheap. (bottles,lines, brackets, solenoids,ect. )

 

[Jetpilot]

I have not personally used it but I know a couple that have. The bar is cool as it is hidden..... But it seems that it will not allow for a large nitrous flow. I just used a couple large solenoids and sprayed them through a nozzel mounted in the intake horn. You should use a hobbs switch in conjunction with a WOT switch to trigger the nitrous. Even better than that incorporate a progressive controller with the two switches. Also a bottle heater is in order as bottle pressure is very important. You should see around 1000-1200 psi of bottle pressure for proper spray. One more thing, be sure to use large enough nitrous lines from the bottle to the solenoids and then to the nozzel. It does no good to have large solenoids and nozzels but not be able to flow the amount of nitrous you want/need.



Doug