Engine/Transmission (1994 - 1998) diferent fuel solenoids

[KHelfrich]

I just swapped my 885 pump out with a 887 pump and the 887 pump had a fuel solenoid bracket that was bigger and my solenoid would not fit in so i just swapped brackets. now if i put the solenoid in with both bolts it binds and wont come up but if i just use one bolt then it works and the other bolt hole is about 1/2 inch away



are there two different solenoids that these trucks had if so does anyone have the part number for the two different ones



thanks

Ken

 

[Missouri Mule]

As I recall the 887 is a 215hp pump your oringinal pump would of been a180 hp pump so there could be differnt in sizes especially if the 887 came off a later model. If you know what year the 887 is you could use the cpl to get the right solenoid at Cummins.

 

[Bob4x4]

The oe solenoids were the same size IIRC but the solenoid Part # was superceded to the larger solenoid. Peak diesel performance sells the origional size solenoid(with brackets and bolts) at a very good price. If you still have both pumps the brackets can be swapped.



Bob