does anyone have the measuremants for

[Monte]

the bellhousing/adapter for nv4500?? that has to be why, we cant get the master cylinder to engage with the clutch... i dont know if we got the wrong adapter from blumenthals in o. k. city or what... all i know, is, we are still 1/2 to 1" off..... so would a nv4500 bolt up on a getrag adapter??? the math just dosnt work out. . what do ya'll think? monte

 

[DVolk]

does any one have the measurements for

Idont have the measurements , but i do know if you dont have the right peices , it wont work , such on a getrag swap from Advance adapters



you have to cut so much off the bearing retainer



check advance adapters web site , are you shure the master cylender dont have air in the lines , also on the adpter to go to a nv4500 you have to swap out the bell housing apapter if the gen 1 bell housing adapter wont work , must be a gen 2 or newer one to work

 

[Monte]

thanks, i am thinking we have the right parts, but we cant get the clutch to engage because of too much play, and the slave cylinder is 1-1/2 " off... . driving me nutts... . m. w. w.