Competition dual turbos

[Mark_Kendrick]

I think Gene's afraid of us overvalved types



He's got that indestructable clutch in front of that candy *** transmission:-laf:-laf



Not that I'd goad him into a race or anything

 

[msmtd]

Andrew-who am I? Who are you? I didn't say YOU were arrogant. And what is so magical about 787hp?



I was just stating a FACT. He doesn't care about showing off his dyno sheet. He was using it as a tool. You see... he ain't a porch sitter. Right Gene?

 

[KatDiesel]

Originally posted by Sled Puller

I may drag, if I don't break pulling, but I am concentrating on the sled.

I didn't build the truck to be a dyno Queen, and I'm afraid I'll get excited and dump that clutch drag racing and shatter things.

Let Eric drive it... hes pretty good with a 5 speed... . if he remembers how



I only dyno if theres other trucks around for comparision... since not everyone goes to the dragstrip as much as I do.

 

[Don M]

Originally posted by msmtd

Andrew-who am I? Who are you? I didn't say YOU were arrogant. And what is so magical about 787hp?



I was just stating a FACT. He doesn't care about showing off his dyno sheet. He was using it as a tool. You see... he ain't a porch sitter. Right Gene?

Let me get this straight before I make a mistake here. You are saying that you saw an engine dyno sheet that showed a B series engine making 950HP on diesel fuel?

Please answer fast Im begining to have stomach cramps from laughing so much.



Don~

 

[Floor It]

That was a sheet showing the power just before it blew the turbo,it was using nitrous. This was at the rear wheels so if that motor was on an engine dyno it would have made more than 950hp.

 

[HoleshotHolset]

On edit: msmtd said: "Well,I know of a IN puller who got over 950 on an engine dyno but blew a headgasket. And he was still still climbing,had plenty left. "



I thought it blew a headgasket... or is it a turbo... . or is it both... . OR, is it something completely different?



Well heck... . if that's the case... . I'm making 1. 51 Jigga-Watts of power at the crank (no accessories) considering the 25% drivetrain loss.....



Matt

I can see this thread heading towards the "I can pee the furthest of any man ever alive... . " direction... ... .

 

[Blackdog]

Gene scared ????, nah!!... . He's got enough to back it up... lol. Take care!

 

[Brandon]

this is just the tip of the iceburg... ... ... .



there are others out there... ... . even names people havent heard about that are making BIG strides into hp, they have no use for the net because they are already on the top



and they laughed at the Wright bros. too

 

[TxDieselKid]

Originally posted by msmtd

Andrew-who am I? Who are you? I didn't say YOU were arrogant. And what is so magical about 787hp?



I was just stating a FACT. He doesn't care about showing off his dyno sheet. He was using it as a tool. You see... he ain't a porch sitter. Right Gene?

Who am I, well i notice most people on these forums, least i use to when i had no life, now i got a job again. Just never seen you and your claiming to have a friend whose got respectible numbers. Most people who have high hp trucks are known. Some people don't want others to know that they have huge hp, ok, so be it, but don't tell us that they have more power unless you will prove it.



About the arrogent thing, sorry, just thought you might be pointing at me.



787hp is a magical number because it is that highest NATION WIDE KNOWN number, i. e; dynoed in front of all to see, where everyone else got a chance to run. Now some people don't care about waiveing dyno sheets, but just because your sharing a dyno sheet, does not mean that you are showing off.



Claim down man, or i'll make you drink a frosty one with me at Munice.



Andrew

 

[Sled Puller]

Originally posted by KatDiesel





Let Eric drive it... hes pretty good with a 5 speed... . if he remembers how



I only dyno if theres other trucks around for comparision... since not everyone goes to the dragstrip as much as I do.

YAH! Let Eric drive it! The King of 5speed destruction!!!!! I believe He is running an ATS auto now? Perhaps he had a good reason to!!?!???Ha! lol Kat!

He prolly can't handle the kind of power I'm making anyway.







TDK,

Nation wide? Yes, perhaps on this tunnelvision site, but hey man, don't start down that path of the internet dreamers that take advantage of their captive audience who are trying to make believe they are the Kings of whatever for the day!!



Ask yourself how many CTD have been sold, and how many members are on this site, and how many out of them actually post?

 

[TxDieselKid]

Originally posted by Sled Puller



TDK,

Nation wide? Yes, perhaps on this tunnelvision site, but hey man, don't start down that path of the internet dreamers that take advantage of their captive audience who are trying to make believe they are the Kings of whatever for the day!!



Ask yourself how many CTD have been sold, and how many members are on this site, and how many out of them actually post?

Gene,

I understand where your coming from, I don't doubt it's possible, but still man, even 700hp is hard to swallow if you know what I mean.



I don't buy into all these, we got this high, on this dyno, and I don't care about "approved" dynos either. Just put it on a dyno and then put about 50 other trucks on the same dyno, same day. THAT IS THE ONLY WAY, i can even start to beleve these numbers are true. As far as sled pullen or 1/4mile times, those also use suspention, and weight(s), transmission shifts, and LOTS of other things to determine the winner. Too many varibles OTHER then hp to really measure.



Andrew

 

[csutton7]

TX-D-Kid---who did 787hp??? if you say DD then you're somewhat off base---yes they hit that just like msmtd's friend hit 950hp, but they both blew something---I don't believe DD is advertising that # and neither should msmtd's friend---I'm almost positive DD is using the 740hp ----chris

 

[StakeMan]

I sure am learning a lot about twin turbos.

 

[csutton7]

AMEN---stakeman--well said----let's see what have we learned from this post--twins turbos mean you have "2" turbos---chris

 

[MCummings]

Originally posted by StakeMan

I sure am learning a lot about twin turbos.

Yah, TWO people blew turbo's.



One at 787 and the other at 950. That's twin turbo's 101.



Twin turbo's 102 is how to rebuild that single turbo and buy another turbo without your wife knowing... .



Second Thoughts???



Naw,, just a change of plans.



Merrick Cummings Jr

 

[msmtd]

It was a HEADGASKET,not a turbo. And I don't care what you guys think or believe... you guys obviously know everything



Don M-What's so funny?? You should know this is easily possible... or haven't you learned this yet be Joe Donnelly's lackey?? Where is Joe anyway?? I figured he would've chimed in... . or is he still browsing through some book,looking for something to quote on here so you guys think he's god again??



You guys live a sheltered life. Get off the 'net and open your eyes. Reality might surprise you.

 

[Don M]

Originally posted by msmtd

It was a HEADGASKET,not a turbo. And I don't care what you guys think or believe... you guys obviously know everything



Don M-What's so funny?? You should know this is easily possible... or haven't you learned this yet be Joe Donnelly's lackey?? Where is Joe anyway?? I figured he would've chimed in... . or is he still browsing through some book,looking for something to quote on here so you guys think he's god again??



You guys live a sheltered life. Get off the 'net and open your eyes. Reality might surprise you.

Ok, so which is it 950HP at the rear wheels or 950HP on the dyno? Was it with diesel only or drugs? Guess we will never know cuz its a secret. Oh well, Dr Performance said he had 1200HP once too.



I have never seen or even heard of a single dyno run from the Mid-West that shows anything in the HP league of the Western trucks. Has anyone even broken 500HP up there yet? Anyone?



At Muncie I put my cash on Jim Fuller winning the sled pulls. He is a Westerner without years of pulling experience, but he has the real, proven, and actual HP to show you guys how to get the job done. Poor ol' Gene and friends are gonna get a spankin' in their own backyard. Drag racing will be dominated by the West too. Geesh, we already know who has the HP for the dyno so the region to win is in the cards. Now if you get yourself on the phone tomorrow with DD maybe there is still time for you to catch up before Muncie.



Don~

 

[RottnDogue]

I Like it ..... Got the whole East vs West Theme..... Nice...



Who's going to play the part of Biggie Smalls, and who's palying Tupac ?????



East Coast vs West Coast... Vs. . No Coast? no that doesn't work... . West vs. . The rest of us . . Yeah that's it...



Darren

 

[CUMINNTSTRKN]

Originally posted by Don M





Ok, so which is it 950HP at the rear wheels or 950HP on the dyno? Was it with diesel only or drugs? Guess we will never know cuz its a secret. Oh well, Dr Performance said he had 1200HP once too.



I have never seen or even heard of a single dyno run from the Mid-West that shows anything in the HP league of the Western trucks. Has anyone even broken 500HP up there yet? Anyone?



At Muncie I put my cash on Jim Fuller winning the sled pulls. He is a Westerner without years of pulling experience, but he has the real, proven, and actual HP to show you guys how to get the job done. Poor ol' Gene and friends are gonna get a spankin' in their own backyard. Drag racing will be dominated by the West too. Geesh, we already know who has the HP for the dyno so the region to win is in the cards. Now if you get yourself on the phone tomorrow with DD maybe there is still time for you to catch up before Muncie.



Don~

wow don your not stirring the pot you just tipped it over. i know i have the hp to compete with the eastern guys, so i guess we will see how i do against the dyno skeered easterners.



msmtd

i don't know you from adam, but it gets old hearing about how some people's brother's sister's unlce's cat's brother once new a guy that made some real hp. these guys start the same crap about the mitchell's. i have never seen or heard enterprise bragging about anything, it's the people that have nothing to do with anything that talk.



it's easy to talk, we will settle this on the sled track. and then if your friend has the guts we will be drag racing on sunday. i am new to sled pulling, but so far my truck has worked great. i have great respect for the people who compete in these pulls or races. it's the people that sit in the stands and talk trash that i can do with out.

if i get my butt kicked i will be the first one to say i was out-pulled,out-run. i don't make excuses i just do the best i can, when i go out there. if i get my butt spanked i will have a couple of months to regroup before scheid.



jim

 

[HoleshotHolset]

"I love it when they call me Big Poppa... ... throw your hands in the air if you's a true playa!!"



Good one Darren!



Matt