Engine/Transmission (1998.5 - 2002) Edge Comp or TST Comp with EZ

[Blacksdieselhp]

Do any of you guys have dyno #'s on a Edge Comp or drag Comp, and a TST Comp and EZ stack or Blue Box and EZ stack. Is there a big difference in either setup? I've always used the Edge stuff because it already had the timing built in, but I see a lot of people talking about the TST Comp and a Van Aaken or EZ stack. Just wandering if there was any power difference on the dyno. Thanks

 

[dougs455]

I have dynoed with pm3/ez. Upgraded to comp and hopefully will see a diference at next dyno run. A power difference is felt but #'s dont lie.

 

[Beast2B]

Ditto the questions. I have a Drag Comp and see 90-95HP between box off and box on on the dyno. I like the ability to turn 100+/- HP on/off, but if there is something to be gained (power, reliability, consistency, etc) by switching, I'd consider it. I would throw the Blue Chip Redline box into the mix as well.

 

[dougs455]

I would throw the Blue Chip Redline box into the mix as well.

Seems to me about the best. Wish I could afford it.

 

[jwilliams3]

Been there done that on both setups.

Drag Comp is the way to go.



PM Comp fuels harder but it shudders very badly (my personal experience).

 

[**ICEMAN**]

Been there done that on both setups.

Drag Comp is the way to go.



PM Comp fuels harder but it shudders very badly (my personal experience).

same here



drag comp made more rwhp and it was SMOOOOOOOOOTH hp.

i can go back through my pile of dyno sheets if you really need to know how much more.

**every engine will react differently to the same modification . someone else's may have lost power and/or still have the fueling and de-fueling shudders. i can only comment on what mine did. **

 

[RDLeader]

FWIW, my drag comp made 166 hp on 5x5.



Roman

 

[Beast2B]

Roman, was the 166hp comp off versus comp 5x5? same day, same dyno, all of the general parameters for a close comparison... ?

Thanks

 

[RDLeader]

Roman, was the 166hp comp off versus comp 5x5? same day, same dyno, all of the general parameters for a close comparison... ?

Thanks

I dynoed injectors only and made 314 @ 25psi. Let the truck cool, then made a run with the comp on 5x5, WG'd at 40 psi (stock HG), I made 36psi on the run and it dynoed 480. Anyone got any numbers for a redline box?





Roman

 

[Todd T]

I hope to dyno this coming weekend with my TST comp. I can post the numbers for you to have an idea of the TST Comp on its own. I dont have it stacked.

 

[Beast2B]

Good deal Todd T,

Have you run it lately? ... or is this the first run with a lot of these mods?