Edge EZ settings (not like instructions)

[Posm]

I just installed my Edge EZ and took it for a test drive. I can feel the new power, but not as much as I expected. I also installed the boost elbow and can get about 24 LBS empty. I got home and wanted to check that the setting was in the most agresive position. I pulled the cover to look at the 6 pins. ( 3 sets of 2) and found that the two left sets have the small plastic jumpers installed. The instructions only show one jumper intalled at a time and indicated it would be on the right hand pin position(most aggressive). I got the box from smokindeisel and they are closed for the week-end. I chose their box that has one timing only position and two timing plus fueling positions. I only got the regular EZ instrucions with the kit that indicates that it has 3 timing plus fueling positions and the jumper should be on the right hand pins when new. Any help would be appreciated!!!!

 

[Strick-9]

Move it to the right for maximum fueling!



The TTPMs have a timing only setting far to the left. Sounds like that is what you are on.



-Chris

 

[JTroiano]

I don't know about the EZ but I just installed the adjustable Comp from the same guys and they were great. I pulled my boat and it was great.

Jon

 

[Posm]

I would move it to the right, however there are two jumpers not one like the instructions. Should I take one off? Should I move both to the right and leave the left position blank? Please help!!!!

 

[Bob Wagner]

one jumper only all the way to the right



: : :here

 

[Ray J]

Originally posted by Bob Wagner

one jumper only all the way to the right



: : :here

Ditto what Bob said... . one and all the way to the right.