Here I am

Edge releases the 600 Juice with Attitude TODAY!

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Replacement injectors....same or updated?

HX-40 performance

Status
Not open for further replies.
I just talked with Justin at Edge Products. He told me that they released the 600 Edge Juice with Attitude Today! Yahoo! Oo. Oo. Oo. Bad note is, Justin said the HP rating is 40 to 100! :{ However, from what Aaron had told me before, they will be offering an "Off-Road" version which you will have to sign a wavier to get.



Now the waiting game again for the 555 Juice with Attitude! Hopefully in a month! ;) I hope the HP is where my Beta model was! I dyno and the Juice with Attitude for the 555 gave me 133 HP increase! :D
 
I'm a beta tester for the 600 juice and the power ratings has always been only 20-100, so it only sounds like they only dropped one setting off. But I will say that it is a real nice box and since the 600 has 325 hp stock it already has 20 more hp than the 305 engine. Granted there is other boxes out there with more hp but can you really use it? From what I have read they have high egt issues so you really can't use all the power, right. corey
 
I heard from Aaron today after my initial post. He said that and I quote him:



"Please remember we will have a free HOT JUICE upgrade. I think you will find the Juice to run real smooth and it uses less fuel to create the same amount of power as other modules out there. I will go into more detail later. Please don't give up on us. " and "by the way the HOT will be much better than your first BETA box. TRUST ME!"



Now he really has me excited!
 
Jeff_K said:
After all that, only 100hp?



Its funny, they get us all excited,and then this??



Why don't they just release the "HOT DRAG" versions at the same time???

Save the time of having to upgrade later, you know?



In other words, EDGE: show me what you got! - dont hold back the HOT version when it is already ready to go!!! (I just dont get their plan, tease,tease, then under-achieve)
 
I know that one of the beta testers on a 04. 5 has the hot box and on level 3 he said he hit 395 on the rollers... His TC wasn't likin it too much...
 
That is a true 100 horsepower at the rear wheels. They don't claim 120 like somebody else then can't back it up. (Well maybe they have 120 at the flywheel, like that means anything)
 
CLAYTON said:
I know that one of the beta testers on a 04. 5 has the hot box and on level 3 he said he hit 395 on the rollers... His TC wasn't likin it too much...



Oh Yea! I'm liking this! Did you try it on 5x5?



With the Beta 555, I did 383 HP on 5x5. Didn't think that was too bad. :D
 
I have been a beta tester for the 4. 5 and have loved having it. I am a motorcycle land speedracer and this truck was ok for me stock. It was strong enough for me to pull the race trailer to the meets. But now that I have had it on and off again for the various upgrades of the betas it makes the stock truck feel sick to me.



While I dont hammer the truck like I do the 350hp turbo motorcycles it does really make a difference and I feel naked without it on the truck. Overall I have been VERY happy with mine and would highly suggest you consider this unit as a classy well supported device without causing a lot of problems etc.



Don
 
Just installed my new unit yesterday as I also have been a Beta tester.

Towed the 3 place enclosed snowmobile trailer up for a ride yesterday afternoon...

All the glitches/issues we had are gone!!!!



Pulls like a freight train!!!!!



:)
 
How does the Attitude monitor gauge readings?

Is that info fed from the comp or do you need to port probes?

I couldn't wait any longer for the Edge/Att and dropped for a set of Westachs, I still need to plumb the probes but if I need to add more I can run pre and post pyros.

TIA
 
Last edited:
The only thing you will need to drill for is the EGT. Everything else reads from the truck computer.

Man that thing pulls like a freakin freight train
 
Status
Not open for further replies.
Back
Top