Here I am

Competition forget about the ats dyno day at least competing

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Competition Indoor pull video

Competition http://www.nhrda.com/

Status
Not open for further replies.
Joe D. still there? Who else?

Joe doesnt even have sickly anymore.

How much can the correction factor change to outcome? I mean, is there a max correction factor? I have seen joes 800hp sheets (actually 799. 9). Dunno if it was corrected or not though.



--Jeff
 
At the last PFI dyno day we had a

'Justin' well into the 690's - '01 Ram

TDR member Scott in his '97 Ram in the 650's

and Mike O. aka Superdiesel in his '02 GMC D-MAX did 779 HP 1200 TQ

So we need a big HP Ram there to uphold the tradition.
 
TPCDrafting said:
At the last PFI dyno day we had a

'Justin' well into the 690's - '01 Ram

TDR member Scott in his '97 Ram in the 650's

and Mike O. aka Superdiesel in his '02 GMC D-MAX did 779 HP 1200 TQ

So we need a big HP Ram there to uphold the tradition.



I will be there soon!!! Oo.
 
my best on dynojet is 592 and i'm trying to get this 250 nitro kit installed real quick but i don't know if i have time to get r done.
 
Jim Fulmer said:
Me... ... 745#2 uncorrected D/FW dyno days last October



Jason... . F8LDOSE is right there with me too.



Big numbers are a little hard to come by when you take them down to below 500 ft as we both know, At M/M I actually only did 699 on #2.



Jim



I don't think so Jim ;)



Oct '04 Fall Brawl



F8TLDOSE 789/1420 corrected #2 only



Correction factor was 0. 98



That makes it 805 uncorrected :eek: :D
 
Last edited:
moolie said:
my best on dynojet is 592 and i'm trying to get this 250 nitro kit installed real quick but i don't know if i have time to get r done.

Make all of your posts this length and you'll have a lot more time:D
 
yeah i guess it doesn't take too long to type really that's of minor concern i just hope it arrives already..... i think it can be installed whenever i got a few people i can hollar at for help if need be
 
is that short enough postmaster









just because u have the look and build of cliff claiven doesn't make u a postmaster... ... .....
 
Correction factor can mean allot, at May Madness it was 6-7% depending on the day and true power was down... ... that's at 2000 ft, now imagine it at 5500 in Denver, I'd bet it would be 12-16% correction, anyone that gets a big number up there will not do the same at M/M or Muncie, without the correction factor the air is just not there.



Jim
 
yeah i've heard the correction factors are high for this elevation but i can't do anything about that other then run when i come in contact with a dyno later this summer... ... i'm dealing with what i got..... We went and broke in that new chasis dyno in greeley man that thing is mean i could only must 550 on it but that's similar to the ats dyno, it's sweet. I need the powerfool installed soon maybe a water meth injection also if i have the time to do it.
 
... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . :D Period button broke :(
 
and the semi colon too:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::;; real usefull post there hope if anyone has questions they get a hold of me... i'm trying to help and be helped if u don't like the post then don't read it... simple solution right?
 
Moolie,



Tell us about your truck. You don't have a signature. What year, transmission, mods, etc... ... ... ... ... .....
 
well well well i'm glad to see that someone was right all along, and i'm not gonna say who that someone is. what should i go spend my 75 extra bucks on oh wait i know i'll put it towards the head studs
 
ok big bad dodge i'll give u a quarter ever time i refer to it. Just remember what the title of this post was and how accurate it was and then u can go buy some sense with the cents i give u..... it'll be on soon enough don't worry getting the head studs this week and then it's on. I know what i've got done and what i need to get done and really don't care what u think of it or not. it's meaningless to me i'm still gonna do what i originally have had planned since i got the truck. So take that quarter and go to ats opening and call me with the results of who won... ... oh wait 733 with the big bad mad dog deja vu. Hopefully since u are on here busting my *** i hope u showed up and handed over your 75 spot to him because if not that just wouldn't be right razing my *** now would it.
 
moolie,



you need to chill. . now



1. you will not win any major dino event against any decent p-pumped truck anytime soon

2. with 550hp you are on the same plane with a modded duramax

3. nitro dont count you need a ,cam, twins, huge injectors, and ,oring

4. if you wanted to be way up there in hp ditch the 3rd gen and get a p-pumped truck

5. maddog has a new engine he did not put a common rail in his truck rather a very expensive p-pumped engine.
 
no i won't u have to have 730 to win it. or 180 over what i have. So with 550 and no drugs i'm fine. I don't have much to say except, i called it. i mean who's gonna try and argue facts. Some sore loser on here like what u labeled me as, argue a fact. The story went from oh his truck is broken down, oh he's not showing, oh he's gonna run his dyno in reverse to oh wait he won it all. damn, I must predict the lotto numbers next. Md is in a class of his own then there is the rest of us... ... i've come far for 6 months alot farther then half the people on here, who have been doing it for years. I never said i was gonna have a 1000 hp truck and try to beat md's truck. So if that's what you feel then you are having a misunderstanding. I jsut want a nice daily which i have already, a decent 1/'4 time and a fat stack of dyno #"s. I'll find out how many others there were over 600 hp and see because i've seen several dyno events on this very forum where 6 and some change has took her home. But u see what is good is that in our country we have our opinion and it just so happens mine became a fact... ... i can write the definition of a fact for the people that struggle. so i don't care if you believe me don't believe me , like me , hate me, who cares. If i didn't have a dodge truck i wouldn't even be WORTHY OF THE BREATH OF SOME OF YOU. Since i have a truck with almost 600 i am almost cool enough to talk to. Kind of like the gym where if you can't bench at least 300 lbs then the really big guys don't even acknowldge you. Shallow prejudging is what that is. So if you don't like it don't read it and better yet stand in line behind all of my other fans... . I'm not on here trying to be liked or be the biggest or the baddest or the most posts or the most cash in the truck. I'll find out about what 2nd place was and the 600 line who was over. I wonder if they had the same event and md didn't enter... ..... just maybe would there be more entries... . you think? Wow i guess there is a few more people that think along the same lines. Only they aren't saying it they don't want to say what they feel like saying. I don't care i'll say what's on my mind. I sure wish i would've entered and wasted 75 dollars that's for sure. So i'm done with this thread what i stated is in fact a fact. So if someone is ignorant enough to try and argue facts then there is no help there and i have much too much going on to even try to explain it. So don't bother me just because u don't agree with me. especially when i was right all along...



oh yeah the earth is round too



and the ts is a single charged truck



and the sun doesn't rise it's just the earth rotating



is someone gonna tell me these aren't true too. That's what some people do on here get there kicks and base their life around someone elses posts... . We'll see how it all plays out and how the truck does... ... If someone has a question about some mod's i'll gladly tell them how specific things did for me but i'm not gonna sit and argue facts. So find someone else to ride because if u are bitter, or upset or hurt then get over it i mean just because a new rookie called it ahead of time don't be mad. Don't worry when i'm wrong i'll be sure to say it too. I'm not a hypocrite and good things happen to good people so we'll just wait and see... .



can u feel that sting
 
Status
Not open for further replies.
Back
Top