Free boost Gauge

[Archive]

I have an extra Isspro (not marked Isspro,it is from a Banks kit) boost gauge that I replaced early on because the needle would get stuck temporarily until the boost hit 10 psi the first time after the truck sat in hot weather. I ordered another one and it did the same thing but over the course of time the problem is actually going away.

I thought I would offer this guage to my fellow first genner's (Old School included) for FREE except for shipping ($4). It has black bezel, red needle, black face and white numbers. There are a few scratches on the bottom of the bezel but when looking at the gauge as it would be installed they are not noticeable.

First person to respond to this post and wants it get it.

------------------
'93 W350 Club Cab, 5 sp. , 129K, Factory Options: LE, 4. 10, LS, 7600 lb. rear springs, tachometer, front stabilizer bar. Mods: Banks stinger plus, Linex bedliner, 25,000 lb gooseneck, 10,000 lb receiver, Tekonsha brake controller, PW injectors.

 

[Archive]

SOLD! I will disconnect 12 valves to qualify

------------------
01 Ram 2500 QC LWB ETC
Dark Garnet/Driftwood
All options except heated leather seats added Smittybilt SS Side Bars and EGR Bug Guard,ARMA Coating Bedliner
And I Love it!

 

[Archive]

Mark: Thanks for your generous offer. As it is, The Banks boost gage installed on my (former) '92 would do the same thing on occasion, but worked fine otherwise. The '98 already has a gage set installed.
I'll opt for a 1ST GEN. DIESEL OWNER to step up and get their boost gage.
There must be someone that needs their first gage.
Regards.

 

[Archive]

Actually, since we are on the "giving away mode " I have a Westach pyro guage Model # 2C2 EGT 700-1700 degrees I also have 712-2DWK sender. This is a new thermocouple BUT... ..... It is the Clamp on style Which the hose clamp IS NOT big enough to fit the pipe. Digital pics on request. FIRST person to respond here gets it. Like new cond. I like the Banks setup better. $ 4. 50 shipped lower 48 states. Bear in mind I will be out on the road Tuesday so it will take a week or so to get it shipped. Gotta pay for the new motor !!! Mike... . The other style thermocouple is avail from Westach Lets keep this in the 1st gen family.

------------------
92 Std cab. LE. 215 P-pump reman cummins motor. 5-speed, 3. 54, 105 gal Aux tank in bed. Borgeson shaft, Banks Power pack. 12cm Hot end housing w/wastegate. 4" Exh, Pyro & boost guage, oil temp guage. E-brake. Galaxy DX99V, Used as a Hotshot/express Reg. at 36,000 lbs in 48 states. http://hometown. aol.com/hotshothauler/myhomepage/business.html

[This message has been edited by David Phipps/Mike Hurd (edited 08-06-2000). ]

 

[Archive]

Dave,

I would be interested in your Westech guage.
Let me know. Thanks

Bruce

1990 D350 Pump turned up. New injectors, 12cm2 housing etc.

 

[Archive]

If it isn't already gone, I've been wanting to put one on mine. Where do I sent the check?
Rich

Originally posted by mark93:

I have an extra Isspro (not marked Isspro,it is from a Banks kit) boost gauge that I replaced early on because the needle would get stuck temporarily until the boost hit 10 psi the first time after the truck sat in hot weather. I ordered another one and it did the same thing but over the course of time the problem is actually going away.

I thought I would offer this guage to my fellow first genner's (Old School included) for FREE except for shipping ($4). It has black bezel, red needle, black face and white numbers. There are a few scratches on the bottom of the bezel but when looking at the gauge as it would be installed they are not noticeable.

First person to respond to this post and wants it get it.

 

[Archive]

The boost guage went to "heaterexpert", I got his check today. A 24 valver checkin' out the first gen site!!

 

[Archive]

Thanks Mark #ad
I would love to own both a first gen and second gen Ram Both Rams are GREAT

[This message has been edited by Heaterexpert (edited 08-07-2000). ]