Here I am

Front License Plate Bracket

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff
D

So there is a wheel change for 2016 HD rams

DEF Quality and shelf life

Status
Not open for further replies.
I bought my truck in North Carolina, no front plate requirement there. I live in New York, it has front plate law. There was a dealer tag mounted with 2 screws into the typical plastic grommets. They are an expand fit into 2 square holes in the front bumper. I believe most front bumpers already have these 2 small squares in them. Very similar to the front plate pictured.
 
Be careful if you go to automatic car wash's (which I normally stay away from - long story on a guy who took his truck through right after someone with a fishing pole and a musky lure went through - you can guess) , the plastic plates may get yanked off by those "soft touch" bristles. I was desperate, ran my truck through and ended up going to DMV and getting a new set after. Made myself a nice aluminum one to replace the old one. My state requires front plates (Colorado) , my neighboring state does not and I hear the local law knows who to pull over by the lack of front plates ;) .
 
The 2010-2015 HD Ram trucks do not come with a front license plate bracket, only the 2 nylon inserts and they are put in the bumper when the dealer PDI's the truck. A bracket from a 2006-2009 Ram Laramie HD or a 2006-2008 Ram Laramie 1500 works pretty well. Make sure the bracket is for a Laramie because the SLT, Big Horn, and ST have a different shape to them and don't fit as well. You should be able to buy one at your local dealer.
 
Status
Not open for further replies.
Back
Top