Attention: TDR Forum Junkies Hey Guys! Replaced the driver side ujoint on the '89 brownie last week so I could race in the mud drags at the county fair. Was not a bad job at all since I had searched the TDR and found out that I could pull the shaft through the knuckle instead of taking apart the kingpins! Only about 4 hours total. The bonus is that now there is definitely less vibration in the front end now while going down the road. Should have done this repair a long time ago, fortunately the toasted ujoint was the only thing bad. Too bad it didn't help my win the mud drags!
Trent
Trent
