Fuel/brake/electrical frame clips

[RSchwarzli]

Does anyone know of a source for the plastic frame clips that hold the brake lines, fuel lines, electrical lines etc to the frame? I would like to get something similar to that so I can also run two 1/2 inch air lines. Anyone have any thoughts on what to use? Thanks,



Robert

 

[MotleyCrueCab]

I used the metal clips that are coated with rubber or plastic that you find in the electronics section of the auto store. YOu can ususally find sizes that go to 3/4 inch or bigger. On my frame i either used prexisting holes or drilled some and secured them with a bolt.



Mike

 

[RSchwarzli]

Do these clips hold one line each, or multiple lines?

 

[MotleyCrueCab]

Depends on the size of the clip and size of the line. They could hold 2 lines.

 

[RSchwarzli]

I will look into these. Thanks



Robert

 

[Philip]

If you have a fastenal branch near you they have a good selection of auto wiring retainers. The website is hard to find anything and some items do not have a pic. But if you can walk in they have desplay boards setup with all auto related items.



http://www.fastenal.com/web/home.ex

 

[RSchwarzli]

Right on! I will check there too. Thanks