Fuel Rail Pressure Gauge is here for bombers

[DLeno]

excellent! what are the settings?

 

[Matt400]

excellent! what are the settings?

In the Special menu section under Eng

• FSC set to 261
  
• dEC set to 1
  
• SPn set to 4. 0v
  
• oFF set to . 5v
  

In the regular menu section

• Uni set to psi
  
• tb can be increased now due to the above FSC setting.
  
  For new users, tb is the set point for the led alarm to warn you of high boost but for this application it is for high rail pressure and can only be set up to what the FSC is or 26. 1 for 26,100 psi.
  
• At I increased from 400ms to 1. 0 sec. to smooth out the jumpy readings.
  
• hr 1 set to "on" (high resolution)
  

NOTE:

Another option is to set the FSC to 267 and then the SPn to 4. 06v that way you can bump up the tb alarm to 26. 7



I did this and rechecked the above chart and got the same exact readings at all the voltages.

 

[DLeno]

now we're cookin with fire. good job matt.