Engine/Transmission (1998.5 - 2002) fuel return T leaking

[gregdoerfler]

does anybody know of a easier way to change the return T at the back of the engine? it is leaking from the bottom line.

 

[Sticks]

IIRC it is a quick connect fitting. You should be able to replace the O-ring inside.

 

[JKreiss]

As far as "easier", i'm not sure. A step ladder and patience to reach in there and get it done should be all you need. It is a pain though and you'll have a sore back when you're done. Nothin a few cold ones won't cure. I eliminated the quick disconnect and just put a piece of rubber fuel line with hose clamps down to the metal line. Mine was leaking and causing a hard start condition. The o-rings in there were pretty chewed up so make sure they're replaced.

 

[gregdoerfler]

That's what I was wondering if I could just cut it out and use rubber hose but was not sure if there was too much pressure.

 

[Sticks]

Better not be any pressure. Just a return line. Make sure you use quality fuel hose. Lot of heat and vibration.