Fuse #16-Spare, What is it used for?

[BigDaddy]

I have checked fuse #16 for voltage and it is Ignition On and Accessory Hot. The wiring schematic for the Fuse Block shows it as Spare. I am loaded except for Power Seats and Trip Computer. Is #16 used for these options, if not what is? #ad

Thanks


------------------
<font color=forestgreen>2000</font> DODGE <font color=forestgreen>RAM</font>, <font color=forestgreen>2500 HD</font>, 4x4 SLT, Reg. Cab, <font color=forestgreen>Forest Green</font>, Agate interior, Cummins ISB, Auto, Shift-on-the-Fly (241HD), 4. 10 Anti-slip Rear, ABS, Trailer Tow Group, Camper Group, Michelin; DC: Fog Lights Kit, Tow Rings, Under Rail Bedliner, VentVisors, Splash Guards, Cold Weather Cover, & Mats.
<font color=forestgreen>After-market</font>: K40, Viper w/AutoStart, Clarion 6 Disk CD w/remote, UnidenCB w/Francis antenna, Draw-Tite Activator II, Alpex 255TC2C Air Horns, Painless Wiring, Delo 400 HOWES, Liquid Glass #ad

 

[Bob Wagner]

I have the trip computer and #16 is still a spare.

 

[BigDaddy]

Thanks Bob. Were down to Power Seats?

 

[Pete Peterson]

On page 8W-12-6 and on page 8W12-16, both diagrams show it as a spare, it does nothing... ... . Pete

 

[Mad Max]

Power for my SPA DG111

=)

Max

 

[Great White]

I was wondering the same thing! Looking for a good spot to land some Bombing parts and needed fused power. Looking at the "Manual" there seem to be several "spare" fuse locations as well as a least one relay location. what do these "spares" feed? #ad
Anyone have any better info?
Rich

------------------
2001. 5 2500 ETH/DEE 4x4,Patriot Blue over Silver,Camper pkg, Trailer pkg,Agate Leather,Stainless Smitty Bars,Tow hooks... . Except snowplow!

 

[ToolManTimTaylor]

Ahh The # 16 is the dodge truck in transit (Key Off Battery Drain) fuse if memory serves me correctly I read it in the BIG Book. It was designed to blow if key off voltage drain is present durring transit from factory to dealer and is removed during P. D. I I will check in a few minutes.

------------------
Y2K+1 <font color=white>3500 4X4 Quad Cab</font> Powerpacked , Jakit's Front End Leveling Kit with 255/85R16 BFG M/T's Custom Rhino Liner (as seen on website under tool man's truck feature) DeeZee Goodies, Hadley air systems 150 psi comp and air storage.
Keeping the rubber side down 'n' shiny side up Will Bring a smile at the end of each day (hopefully) #ad



.

[This message has been edited by ToolManTimTaylor1 (edited 03-16-2001). ]

 

[ToolManTimTaylor]

New Vehicle Preparation 36-7

The assembly plant has shipped ALL vehicles with the interior lights and most electronic memories non functional by way of an Ignition Off Draw (IOD) fuse removed. The purpose is to reduce the possability of battery run down during shipping and storage. Vehicles after prep should have the fuse pulled to prevent drain.

_____________________________________________
In my eyes bigdaddy if this fuse is replaced it will activate a central disconnect located inside the central timer under the dash. I for one would not use it and go by an add on trminal box and mount her under the bonnet. This above I pulled out of the big book bible word for word (no typos)

------------------
Y2K+1 <font color=white>3500 4X4 Quad Cab</font> Powerpacked , Jakit's Front End Leveling Kit with 255/85R16 BFG M/T's Custom Rhino Liner (as seen on website under tool man's truck feature) DeeZee Goodies, Hadley air systems 150 psi comp and air storage.
Keeping the rubber side down 'n' shiny side up Will Bring a smile at the end of each day (hopefully) #ad



.

[This message has been edited by ToolManTimTaylor1 (edited 03-16-2001). ]

 

[Thomas]

The Ignition-Off Draw fuse is fuse cavity #12 on your model year 2000 Ram.

Fuse cavity #16 is a spare. One side of the cavity is connected to the ignition switch run and ignition switch accessory contacts. The other side of the cavity is not connected to anything.

[This message has been edited by Thomas (edited 03-16-2001). ]

 

[ToolManTimTaylor]

SAE Book #2 Has a Typo Checked the book against my rig this morning and you are correct #12 is the IOD! Cought 'em red handed. Calling publisher today to let 'em know. BR/BE 8W-97 Power distribution (iod) disconnect from junction box cavity#12.
the above is found in a different section (go figure)

------------------
Y2K+1 <font color=white>3500 4X4 Quad Cab</font> Powerpacked , Jakit's Front End Leveling Kit with 255/85R16 BFG M/T's Custom Rhino Liner (as seen on website under tool man's truck feature) DeeZee Goodies, Hadley air systems 150 psi comp and air storage.
Keeping the rubber side down 'n' shiny side up Will Bring a smile at the end of each day (hopefully)

#ad



.

[This message has been edited by ToolManTimTaylor1 (edited 03-16-2001). ]

 

[PAYCHECK]

TOOL MAN; BONNET? ARE YOU BRITISH? LOL

------------------
01 2500HD Q. C. 4X4,241HD,SLT+, SB,3. 54,5spd,jacobs e-brake,tow pack,camper pack,all black,all leather,fully loaded,htd power mirrors,htd seats,full rhino lining bed and rocker panels,265/85r16 BFG ATs ko,nerf bars,everthing black,4'' Jardine,Westach boost & EGT gauge,License plate-1 CUMN,

 

[ToolManTimTaylor]

Wow By family yes (10 generations back) but the ol' lady's parents are and well I contracted the lingo. PIP-PIP

------------------
Y2K+1 <font color=white>3500 4X4 Quad Cab</font> Powerpacked , Jakit's Front End Leveling Kit with 255/85R16 BFG M/T's Custom Rhino Liner (as seen on website under tool man's truck feature) DeeZee Goodies, Hadley air systems 150 psi comp and air storage.
Keeping the rubber side down 'n' shiny side up Will Bring a smile at the end of each day (hopefully)

#ad



.

[This message has been edited by ToolManTimTaylor1 (edited 03-16-2001). ]

 

[The patriot]

How many amps is that #16 good for?(gauge wire)
Just curious...
Eric

 

[Pete Peterson]

Fuse holder 16 is good for 20 amps for the block its in, 50 amps total=14, 15, &16... ... Pete

 

[The patriot]

Thanks. Gotta make mental note of that.
Eric


[This message has been edited by The patriot (edited 03-19-2001). ]

 

[BigDaddy]

Thanks for the responses.

I would have thought it was used in some other configuration, but guess not.
Sure was nice of DC to give us some room for expansion.
I am going to use this slot to power the relay on my Painless Wiring and get rid of that cheesy fuse tap that comes in the kit.


------------------
<font color=forestgreen>2000</font> DODGE <font color=forestgreen>RAM</font>, <font color=forestgreen>2500 HD</font>, 4x4 SLT, Reg. Cab, <font color=forestgreen>Forest Green</font>, Agate interior, Cummins ISB, Auto, Shift-on-the-Fly (241HD), 4. 10 Anti-slip Rear, ABS, Trailer Tow Group, Camper Group, Michelin; DC: Fog Lights Kit, Tow Rings, Under Rail Bedliner, VentVisors, Splash Guards, Cold Weather Cover, & Mats.
<font color=forestgreen>After-market</font>: K40, Viper w/AutoStart, Clarion 6 Disk CD w/remote, UnidenCB w/Francis antenna, Draw-Tite Activator II, Alpex 255TC2C Air Horns, Painless Wiring, Delo 400 HOWES, Liquid Glass #ad