Attention: TDR Forum Junkies Ok folks, Its done. We here at Teaxs Diesel Power have pulled it off. We Just installed a valair G56 conv. kit. 3400lb plate load ,12 button , ceramic dampened disk . We had to grind a little on the starter spacer, But other than that it went off without any problems. The starter spacer they sell will be modified in house from now on. As for the drivability, It was awesome with no break-in. Dan at valair recomended a break in, but we couldnt wait to try it. Oo. There was a little clutch rattle at idle & off the clutch, not enough to worry about. We see a little rattle on all ceramic clutches. Pedal was stiffer of course, but normal for a 3400lb plate load. It looks to me like the good old free enterprise system is alive and well!! :-laf . I will send pics in a little bit.
Last edited by a moderator:
by the way my valair clutch will be in by the end of the week and I will not be lighting up the dools as you have in your pic until 500 miles of good break in time. . 
. . later Dave
