I drove from Jacksonville FL to Salisbury NC to have a RASP installed. It was nearby only 435 miles. After reading a lot of LP blues it was time to go mechanical. Called Mr. Poole to set up an appt. After a 3-11 Tuesday night, I drove straight to Olee's shop for my 8:30 appt Wednesday morning. Olee and Eric did a helluva outstanding job, proffessionally done!The excess fuel return line has steady flow to the tank, I saw it disconnected for testing. After installing the RASP, DD2 Injectors, F/P Gauge, Boost Elbow, new serpentine, and replacing the puker with a pipe to ground setup, OP and me took her out. No runs, drips, or errors. I was back on the road before 5. Fires right up with consistant 14 psi at idle. In 6th at 75 mph/2000 rpm reading 15 psi, 80mph/2500 rpm about 16 psi (ran out of numbers on gauge). Okay... WOT 3000-3100 rpm at 117 mph in 6th my W. A. G. was about 18-19 psi... had to watch the road! The truck runs really strong with no hiccups. So there you have it if the VP needs it RASP feeds it! Great product, get one if you're singing the LP Blues! If you live close to Olee like I do pay him a visit. If not he can mail you one with the fuel lines already set up for you. He does great work and lot of other stuff too!!! Hell of a great guy and nice staff. Thanks PBP!!!
http://www.powerbypoole.com/home.html



Last edited: