Got the mud flaps how do I install them?

[Archive]

I bought the Dodge/Cummins mud flaps (from the Cummins store) for my truck. How should I install them? Should I use screws or bolts? I don't want them to fall off because I didn't install them correctly.

Any help would be appreciated.

#ad




------------------
2001, 3500, 2X4, QC, SLT, Auto, 3. 54 gears, camper and tow packages. Lance model 1130 camper. Rancho 9000 5 Speed shocks. BD Brake, autoloc, pressureloc. Hadley air horns. OEM bugshield w/eyebrows and dash cover. Member San Jose Ram Runners.

 

[Archive]

red1ton,

I used black screws for my Dodge factory flaps. I think they were provided. They held on the '95 truck until I removed them to install them on the Y2K.

I did dab a bit of silicone sealant on each one to prevent rust at the unpainted edge of each hole I drilled.

Loren

------------------
2000 Quad Cab, 4x4, short bed, six-speed: U. S. Gear exhaust brake, MileMarker Select Drive viscous coupling, Velvet-Ride spring shackles, Painless Wiring circuit box, Optima yellow-top batteries, Super-Glide 5th wheel hitch, Reese folding ball gooseneck hitch, Drawtite front hitch receiver, Tekonsha Sentinel brake controller, Westin nerf bars, Clarion sound system
1995 Standard Cab, 4x4, long bed, automatic: Firestone Ride-Rite air springs, torque converter lock-up switch, 4" cat-back exhaust, Reese 20K 5th wheel hitch, Reese gooseneck hitch, Hayes Micro Control trailer brake controller, 100 gallon bed-mounted fuel tank with 12 volt electric pump & fill nozzle, Swiss Cap fiberglass cap