Ham/FM Radio

[Big K]

I want to mount antennas on the new truck. I'll need one for CB, and one for FM. I am going to use a loaded whip style antenna. Specifically Larson NMO series. Ideal location is on top of the cab, but I have reason not to do that. I'm going to put them on underhood brackets in the same location as most everyone else.

I have had no trouble finding this bracket, but all those I have found have the smaller hole that is used to mount the grounded fiberglass whip. To mount the style that I'm using, the hole needs to be 3/4", and the ground screw hole is not necessary. I know that I could enlarge the hole in one of these brackets, but if someone knows of a source for a bracket of the proper dimension, I would appreciate the lead. Any other tips on mounting appreciated.

Thanks

 

[Un-Hemi]

Check any of your local commercial 2-way radio shops. A Dodge mount with a 3/4" hole for NMO is as common as dirt. We get ours from West Crystal in Kelowna BC 'cuz they're close. (250) 765-4833.

 

[Big K]

I might have to get them from up there in the great white north. My shop down here is clueless. Good service on the radios, but when I asked for the mounting bracket, it was, "you want what... ?". I'll keep listening.

Eric

 

[EastTexasDiesel]

Antenna mount for Dodge Rams

The mount is made by larson antenna and mounts directly to one of the fender bolts just inside the drivers side of the hood/fender space about 16" from the windshield. It is stainless steel and well made. I am using it for my amateur radio antenna.

 

[Bob Wagner]

and they are right in your backyard too

http://www.radialllarsen.com/





WMB

 

[Big K]

Thanks, guys. I know that Larson is right here in Vancouver, but my radio shop draws a blank. They do so well on the radios... .....

I'll try Larson direct.



Hey Ski Machine, have you checked us out on http://www.nwbombers.com ?? You're right in our neighborhood. Stop on in and say hi!



Thanks again

Eric

 

[John_Barks]

I tried the fender mount and just coudnt get it grounded well enough. Wound up going to a roof mount.