Engine/Transmission (1998.5 - 2002) Head bolt Torque - FYI

[bluthndr]

Just put a new gasket on my '01 24V and used Snap-On's new "angle torque" torque wrench. 80 ft lbs + 90*(1/4 turn) = approx 125 ft lbs. The torque value flashes after you reach your specified angle.



I used ARP lube under the bolt heads and on the threads with brand new Cummins head bolts.



Just thought everyone would like to know.

 

[zstroken]

You aren't running studs?

 

[bluthndr]

On my 12 valve, but not on the 24. Just don't need the added expense and I've seen lots of other 24 valves fare well around the 500hp mark with bolts and no rings.

 

[zstroken]

no prob, I saw your other post about oring problems

 

[bluthndr]

I should also say that this truck was serviced for the external coolant leak common on 24V engines, not because it blew under pressure.