Here I am

Help, Need Injector Tips Or Injectors

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Bad day...Dyno

any ideas/part numbers for 93 mud flaps?

Status
Not open for further replies.
i shouldnt notice it since i just rebuilt the pump and cranked it up, put in an intercooler with 3 inch tubes and a 2nd gen intake elbow,with the new injectors, set the valves, new lift pump. without the i/c i got 42psi with a modified crossover pipe.
 
just drove the truck today with new injectors and runs so much smoother, and quieter, acceleration feels much smoother and takes less pedal effort to keep at speed, and i still havent put the intercooler in yet, waiting for some parts, but i made a 2 1/4 inch diameter crossover pipe to replace the stocker which looks like 1 1/2 inch at the turbo outlet.



i cant watch the boost gauge for too long because im moving too fast but it looks like just under 45psi. is that too much for stock turbo?
 
I pulled a turbo not long ago that was seeing that pressure and a bit more. It lost preassure and upon pulling it, the turbine was torn apart.
 
I "think" Daniel's etal is an internet slang term for "equal to"/"same as" etc.



He has used it in the past and sorta kinda figgured this out over the years... .
 
yeah thats kind of confusing for the (regular english speaking) rest of us.

there should be some sort of legend for theese terms on here
 
TWorline has it right. I knew it was Latin, and meant "and all".



I am one of the least savvy when it comes to internet slang. Sorry for the confusion. I thought most who had passed high school english knew et al



DP
 
high school? whats that?:confused: some kind of fancy learnin place. :-laf

just kidding, thanks for the info.
 
Last edited:
Status
Not open for further replies.
Back
Top