Hi Flow Banjo Bolts

[PAYCHECK]

Ray, i will take a set,with one tapped. please post with details or e-mail. thanx!

 

[Jeepthing]

Please include one set two tapped for me. Thank You Let us know how to pay or email me.

 

[SLittle]

TTT

 

[JTBMC]

Just in time

Ray, I'll take (5) As needed for my 99, I've recently purchased a new Lift Pump & wire harness from Cummins and will change all at the same time. I have e-mailed you with my address info.

THANKS

 

[frijole]

Ray, Please put me down for a full set of 5, with 2 tapped. You da man. You get 3 "attaboys" for this effort. My kinda man... .

Find me when you need money. . Ron

 

[JHansen]

I'd also be interested in a set with 2 tapped. When you're ready to go please e-mail me with the particulars on where to send my cheque etc. Thanks in advance!



Jason

 

[BigUgly]

Put me down for a set with 1 tapped.

You Da' man!

Josiah

 

[BarryG]

Ray:

I will definitely take a complete set with two tapped. Thanks for the effort to get these things going. Please let me know how to order and where to send payment.

BarryG

 

[John Berger]

I'm in.

Ray, good deal man. Put me down for 1 full set, with two tapped.

Contact me when you need the loot with the info to get it to you.



John

 

[work2muchplay2little]

Ray, I'll take a set of 5 with 2 tapped.



Thanks!

 

[Ramafid]

I'll take a set with one tapped. Thanks for the hard work. Let me know about the money matters and shipping info.

 

[Murle]

Ok, I have a question. Has anyone got their fittings yet??? Has anyone heard from Ray?? Just asking.

 

[Ray Torresdal]

bolt delivery

UPS just delivered the bolts from plating. Tomorrow we'll be ready to start shipping. Please email me with your address and zip code, so we can figure UPS charges. If you would like to use plastic, it can all be done with a single phone call. If you want to send a check, let us know the address so we can figure UPS, and we'll send an email with the exact charges. Please don't call until Friday (tomorrow) as my office manager is out today, and I have other parts to run.



Thanks guys!



Ray Torresdal

R. L. Torresdal Co. , Inc.

1413 Hwy 52

Ossian, IA 52161-0344



email rltco@acegroup. cc

563-532-9884 phone

563-532-9387 fax

(Our area code just changed from 319. If you have trouble getting through, try 319 area

 

[Murle]

Hey now that is service.

 

[TowPro]

OK, so I go and open the hood on my 98. 5 and check out the bango bolts, I can't see how you are going to replace them, They look like there welded to a steel fuel line?



the input to the pump has about 5" of steel line with a hose going to it from the filter, but the one between the filter and transfer pump looks like its all steel.



Ok, so I have not been "paid" machanic for about 12 years now, but it sure looks like the steel line is welded to the fitting.



How do you change them?

 

[Benson]

I am also interested - tapped. Let me know. Thanks.

 

[BigDaddy]

Towpro,



Basically it's a bolt that has a center hole and holes drilled through the sides. The steel line has a hollow circle swagged to it like the shape of a banjo.



I would recommend getting Ray's Banjo Bolts and once you have them in your hand you'll say, DOH! .



Sorry I don't have a picture to post. Hope this helps.

 

[JTBMC]

TowPro, use a 17 mm box end or a 17 mm 6 point 3/8 sockett on the bolt heads that you see on the fuel line banjo's. It's easy to do . You need 5 of them also. 1 on the lift pump 2 on fuel filter & 2 on the lift pump.

 

[zman]

Ray -



I'm in for one set with 2 tapped. Let me know when it's time to pay. Thanks!



Steve

 

[TowPro]

After I posted my question, I was laying in Bed and went DOH!, he's talking about the bolt that goes through the banjo fitting, "what was I thinking? DOH! Some times I can be so, wall we will say "Homer Simpson"?

Originally posted by BigDaddy

Towpro,





I would recommend getting Ray's Banjo Bolts and once you have them in your hand you'll say, DOH! .